LED flasher for LED front & rear
#1
LED flasher for LED front & rear
I am going to swap out the front and rear bulbs to LEDs. I have done some research and have seen a few flashers that supposedly work.
I have seen the following one's recommended:
EF32RL
LL552
CF12ANL-01
Trying to figure out which one would work.
This would be for my 2002 Camaro SS.
Thanks.
I have seen the following one's recommended:
EF32RL
LL552
CF12ANL-01
Trying to figure out which one would work.
This would be for my 2002 Camaro SS.
Thanks.
#2
Ungrounded Moderator
iTrader: (4)
Of those three, only the CF12ANL-01 is designed to be completely "no load" for use where all bulbs have been replaced with LEDs. Some people have been able to get the EF32RL to work with all LED bulbs while others have not so I wouldn't rely on it. The LL552 is electromechanical and definitely won't work without a load.
#6
Copy & Paste Moderator
I used a "Keep It Clean FF552NLF No Load Fixed Flasher" that I bought on Amazon for $15 delivered.
#7
I used a "Keep It Clean FF552NLF No Load Fixed Flasher" that I bought on Amazon for $15 delivered.
Amazon.com: Keep It Clean FF552NLF No Load Fixed Flasher: Automotive
Amazon.com: Keep It Clean FF552NLF No Load Fixed Flasher: Automotive
Trending Topics
The following users liked this post:
fucter (04-15-2021)
#10
#12
Banned
iTrader: (2)
Here's mine and the parts/prices I purchased. 6 years going strong, no issues.
....and like "VIP1" said.....a synthetic "tock" sound is how mine sound too.
https://ls1tech.com/forums/appearanc...light=flashers
.
....and like "VIP1" said.....a synthetic "tock" sound is how mine sound too.
https://ls1tech.com/forums/appearanc...light=flashers
.
#19
TECH Fanatic
iTrader: (2)
ok not trying to hijack but just adding on, well I added LED switchbacks fro Astar and well the drivers works and his bright white but doesn't blink and the passenger side starts out white and does blink orange but then will not switchback at all and that's with the car not started once I start the car the passenger side front turn signal stays solid orange? now I replaced the turn signal flasher with the EL12 flasher from vatozone but do I need to replace the hazard flasher as well?
#20
Ungrounded Moderator
iTrader: (4)
Sounds like the right (passenger) side is working as designed. Those switchback bulbs have white for parking lights (normally the dim filament of a 3157 bulb) and amber for the turn signals (normally the bright filament of a 3157 bulb). F-bodies use the turn signal circuit for daytime running lights so the switchbacks will be solid amber when the ignition is on and the parking brake is released except for when your headlights are on.
The driver's side doesn't seem to be making a connection for the DRL/turn signal circuit. That could be the bulb's wire contact is bent out of position, the bulb is reversed, the socket is corroded, or something is wrong with the blue wire into the socket.
The driver's side doesn't seem to be making a connection for the DRL/turn signal circuit. That could be the bulb's wire contact is bent out of position, the bulb is reversed, the socket is corroded, or something is wrong with the blue wire into the socket.