Fog Light Switch/ASR Switch diagrams
#1
11 Second Club
Thread Starter
iTrader: (103)
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like
on
1 Post
Fog Light Switch/ASR Switch diagrams
I've done a search and seen lots of window switch diagrams. What I want is the fog light switch diagram so I can use the switch (bought two more) for other purposes. If anyone could post up which leads on back of the switch are wired for what. . .
I even tried resistance checking the switch in both positions and kept getting odd readings (guessing the LED is throwing readings off)
Thank you
Duffster
I even tried resistance checking the switch in both positions and kept getting odd readings (guessing the LED is throwing readings off)
Thank you
Duffster
#2
I plan on doing the same thing, but I can't find any switches to buy! I plan on wiring one to kill my AHL/DRL lights, and the other for interior lighting. Once I get my two switches in, I'll let you know what I did with them, and how I did it.
#6
11 Second Club
Thread Starter
iTrader: (103)
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like
on
1 Post
Whitebird00, Thank you. With the assistance/information you gave me, I was finally able to wire a 2nd foglight switch to operate a DPDT relay (9.85 from Radio Shack) to operate my electric cutout. this frees up my ashtray to now hold my cell phone ;D Oh yeah, and looks cooler
NEXT PROJECT: LEDs or Neon behind the Camaro center tail panel (with the C A M A R O already cut out). Needs painted then filled w/clear epoxy
Thanks again!!!
NEXT PROJECT: LEDs or Neon behind the Camaro center tail panel (with the C A M A R O already cut out). Needs painted then filled w/clear epoxy
Thanks again!!!
Trending Topics
#9
11 Second Club
Thread Starter
iTrader: (103)
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like
on
1 Post
I'll start snapping pictures tomorrow to show where I'm at.
thought I had a blue neon light. . .got the red one
so I could theoretically get it done in a few days without
the blue light (i.e. 4th red brake light) but I want the blue
one mainly!
Duff
thought I had a blue neon light. . .got the red one
so I could theoretically get it done in a few days without
the blue light (i.e. 4th red brake light) but I want the blue
one mainly!
Duff
#10
11 Second Club
Thread Starter
iTrader: (103)
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like
on
1 Post
damn I'm slow!!!
Ain't gotten anywhere except done with the bondo work on the rear tail panel...need to sand smooth and prime/paint it still...once painting is done,
I'll add the clear resin to fill in the letters and then light it up!
Ain't gotten anywhere except done with the bondo work on the rear tail panel...need to sand smooth and prime/paint it still...once painting is done,
I'll add the clear resin to fill in the letters and then light it up!
#12
11 Second Club
Thread Starter
iTrader: (103)
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like
on
1 Post
and to top it off. . .did the ASR & Foglight switches tonight also. . .wife is snoring right now. Tired of waiting for me...
Got VERY TIRED of the orange LEDs for my odometer/trip meter. . .
BTW, you need to be VERY careful when disassembling this. . .and soldiering this. . .and reassembling this. . .
Lots of little things you can do wrong, and then, it gets expensive
Got VERY TIRED of the orange LEDs for my odometer/trip meter. . .
BTW, you need to be VERY careful when disassembling this. . .and soldiering this. . .and reassembling this. . .
Lots of little things you can do wrong, and then, it gets expensive