Red-Light accenting my car
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Red-Light accenting my car
First of all, does anyone know where I can buy red bulbs to put in my rear view mirror and my dome light? I tried using some red plastic things that wrapped around the bulbs that autozone sold, but um... they started smoking after being on a few minutes, so that didn't work.
Also, I'd like to put something under the passenger and driver side, like down above the feet. The easiest thing I can think of is red neons, anyone have any suggestions what to buy? I want to wire whatever I get so that it only turns on when the doors open... where should I wire them to?
EDIT- Links to ebay auctinos or something for suggetions would be great
Also, I'd like to put something under the passenger and driver side, like down above the feet. The easiest thing I can think of is red neons, anyone have any suggestions what to buy? I want to wire whatever I get so that it only turns on when the doors open... where should I wire them to?
EDIT- Links to ebay auctinos or something for suggetions would be great
Last edited by contemptor; 06-24-2006 at 05:51 PM.
#2
get some cold cathode tubes. dirt cheap. as far as wiring them in, im not sure what controls the lights on the inside of the car, but i think its the body control module. ccfl lights draw a pretty low amount of amps, so they shouldnt damage anything, but be careful how you connect them.
#3
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Small problem
I pretty much have no idea what I'm doing, and don't really know what you're talking about. I'm a car noob... pretty much why I posted here :o Sorry, I shoulda mentioned that.
I pretty much have no idea what I'm doing, and don't really know what you're talking about. I'm a car noob... pretty much why I posted here :o Sorry, I shoulda mentioned that.
#4
no prob. ccfl is cold cathode flourescent lighting, also know as instant igniting neon. it uses a filamentless bulb, and an inverter (takes 12v and turns it into around 600) do a search for ccfl on google, youll get thousands of results. some one else here could probably give you some pointers on how to connect it up properly to get your the results you want
#6
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OOZ28
I dunno about dome lights, but this is a pic with the lights in the floor board.
#7
On The Tree
Join Date: May 2005
Location: Midland, Tx
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
yea its mine, I have it wired up to its own switch so I can have on when I want, as far as wiring it up to come on when the door opens, Id try finding a 12v wire running to the dome lights and use that for your power, jmo though.
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OOZ28
yea its mine, I have it wired up to its own switch so I can have on when I want, as far as wiring it up to come on when the door opens, Id try finding a 12v wire running to the dome lights and use that for your power, jmo though.
#9
On The Tree
Join Date: May 2005
Location: Midland, Tx
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by contemptor
Where/what kind of lights are you running? link perhaps?
http://www.partsamerica.com/ProductD...tnumber=OP15RD
#10
TECH Fanatic
iTrader: (1)
Join Date: Jun 2006
Location: Phoenix, AZ
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
I have the same thing... only blue. I also have smaller ones in all the A/C vents. I'll post pics up tonight. I too have mine wired to a switch though so I can control them. I know that my Autozone has a little end-cap that sells a ton of different colored bulbs. I did my domelight, reverse lights and side marker lights in blue, but decided against doing the ones in the mirror blue as I need some plain light for reading stuff.
#11
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OOZ28
Heres the link to the ones I used, I got them from Advanced Auto. They are the 15' Red ones
http://www.partsamerica.com/ProductD...tnumber=OP15RD
http://www.partsamerica.com/ProductD...tnumber=OP15RD
You don't have any trouble with them overheating, or accidentally kicking them or anything?
#12
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WhiteStripes
I have the same thing... only blue. I also have smaller ones in all the A/C vents. I'll post pics up tonight. I too have mine wired to a switch though so I can control them. I know that my Autozone has a little end-cap that sells a ton of different colored bulbs. I did my domelight, reverse lights and side marker lights in blue, but decided against doing the ones in the mirror blue as I need some plain light for reading stuff.
I tried that with rear view mirror lights, and my dome light, because didn't sell red ones like that. Today after the door was open for a few mins my rear view one (only did one to test it) it started smoking... it seems that bulb gets way too hot. I thought I saw some smoke coming from the rear bulb also, and the bulb/plastic was REALLY hot so I took it out too :/
I wish I could find red bulbs to fit the rear view and dome.
And how did you get the ones in the AC vents wired? Do you have wires running out of your vents?
#13
Ungrounded Moderator
iTrader: (4)
An "end cap" is a retailing term refering to the shelving at the end of an aisle that's used to promote products with added visibility.
You can find red bulbs online at places such as autolumination.com. The mirror uses #214-2 and the dome light uses #561. You can Google using "bulb red 561" (without the quotes) to find other suppliers.
You can find red bulbs online at places such as autolumination.com. The mirror uses #214-2 and the dome light uses #561. You can Google using "bulb red 561" (without the quotes) to find other suppliers.
#15
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WhiteBird00
An "end cap" is a retailing term refering to the shelving at the end of an aisle that's used to promote products with added visibility.
You can find red bulbs online at places such as autolumination.com. The mirror uses #214-2 and the dome light uses #561. You can Google using "bulb red 561" (without the quotes) to find other suppliers.
You can find red bulbs online at places such as autolumination.com. The mirror uses #214-2 and the dome light uses #561. You can Google using "bulb red 561" (without the quotes) to find other suppliers.
Edit- 6.99 a bulb at autolumination... ouch
Last edited by contemptor; 06-25-2006 at 12:50 PM.
#16
11 Second Club
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
i have some in white.
they come on and turn off with the map and dome lights
under the a piller their are 3 wires that go to the map light tap in to their and run the wires and your done.
they come on and turn off with the map and dome lights
under the a piller their are 3 wires that go to the map light tap in to their and run the wires and your done.
#17
On The Tree
Join Date: May 2005
Location: Midland, Tx
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by contemptor
15 feet, that's pretty long :o
You don't have any trouble with them overheating, or accidentally kicking them or anything?
You don't have any trouble with them overheating, or accidentally kicking them or anything?
#18
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bad6as
i have some in white.
they come on and turn off with the map and dome lights
under the a piller their are 3 wires that go to the map light tap in to their and run the wires and your done.
they come on and turn off with the map and dome lights
under the a piller their are 3 wires that go to the map light tap in to their and run the wires and your done.