HUD in an F-body? Is it possible?
10-09-2007 | 06:41 AM
#1
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Aug 2005
Posts: 739
Likes: 0
From: Knoxville, TN - Cedar Bluff
HUD in an F-body? Is it possible? This may be a dumb question but I was sitting there over the weekend looking at my buddies 06 Vette trying to figure out a way to get a Heads Up Display unit to work in an f-body. It would be easy to mount the unit in the dash but what exactly runs the HUD? Does it get it's signal off of the computer? I'm wondering if I could get one from a wrecked C5 and wire the tach and speedometer up to work correctly since the f-bodies have basically the same set-up as far as the electronic speedo and tach. Has anyone done this or does anyone know how they operate? It was just a thought.
10-09-2007 | 09:07 AM
#2
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,724
Likes: 190
From: Eastern MA
Here is another HUD thread:
https://ls1tech.com/forums/appearance-detailing/689186-c6-hud-fbody.html
https://ls1tech.com/forums/appearance-detailing/689186-c6-hud-fbody.html
10-09-2007 | 06:53 PM
#4
Staging Lane
Joined: Mar 2007
Posts: 52
Likes: 0
From: bellevegas,Il
I purchased the Delfi and the only thing sucks about it is that you can't see the display in direct sunlight, unless you put a piece of window tint on the windshield.
Finding the wires wasn't hard at all it took me less than an half an hour to find. Here is a picture of mine fiberglassed in my dash. It's the one located on the left side.
Finding the wires wasn't hard at all it took me less than an half an hour to find. Here is a picture of mine fiberglassed in my dash. It's the one located on the left side.
10-09-2007 | 07:07 PM
#5
pontiac also had some HUD units in some of the grand prix models. they would look factory in a trans am. the switch to turn it on would even fit right in with the trans am interior. just a matter of who wants to take the time to put it together.
10-10-2007 | 01:46 AM
#6
I purchased the Delfi and the only thing sucks about it is that you can't see the display in direct sunlight, unless you put a piece of window tint on the windshield.
Finding the wires wasn't hard at all it took me less than an half an hour to find. Here is a picture of mine fiberglassed in my dash. It's the one located on the left side.
Finding the wires wasn't hard at all it took me less than an half an hour to find. Here is a picture of mine fiberglassed in my dash. It's the one located on the left side.
got any more pics of your install...... id like to see some pics of your dash after it was cleaned.
Trending Topics
10-10-2007 | 03:15 AM
#8
10-10-2007 | 10:33 PM
#12
No , they dont. Is that what a windshield repair shop said? ALl that is required, is a reflective surface. Reflective tint amongst other things work well. Some factory units have the reflective tint in between 2 panes to make it seem like you must purchase a whole new windshield
