Wiring, Stereo & Electronics Audio Components | Radars | Alarms - and things that spark when they shouldn't

DIY Box Build

Thread Tools
 
Search this Thread
 
Old 02-22-2008, 09:31 PM
  #21  
TECH Fanatic
Thread Starter
iTrader: (3)
 
cws T/A's Avatar
 
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts
Default

















Old 02-22-2008, 09:58 PM
  #22  
TECH Fanatic
Thread Starter
iTrader: (3)
 
cws T/A's Avatar
 
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts
Default











Old 02-22-2008, 10:34 PM
  #23  
TECH Fanatic
Thread Starter
iTrader: (3)
 
cws T/A's Avatar
 
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts
Default

Set the gains with a DMM , videos arent that great of quality so bear with me . Distortion is the cameras mic being overpowered . Bass is so clean and hits crazy lows . Really satisfied with this build , alot has to do with that Fi sub , amazingly clean spl sub .



Almost 3/4 volume , car sealed up . Next step is sound deadener in the rear lol .


Low volume


Hits better with the car running , sub is still tight , cant wait to hear it when the suspension loosens .
Old 02-23-2008, 12:51 AM
  #24  
TECH Fanatic
 
fredmr39's Avatar
 
Join Date: Oct 2006
Location: Champaign/Chicagoland
Posts: 1,003
Likes: 0
Received 3 Likes on 3 Posts
Default

Turned out nice - pointless vids tho.... will never even begin to do the setup justice.
Old 02-23-2008, 10:18 AM
  #25  
TECH Fanatic
 
pentavolvo's Avatar
 
Join Date: Nov 2006
Posts: 1,273
Likes: 0
Received 1 Like on 1 Post

Default

so i see u have one crossover mounted on the amp rack, wheres the other
Old 02-23-2008, 03:51 PM
  #26  
TECH Fanatic
 
fredmr39's Avatar
 
Join Date: Oct 2006
Location: Champaign/Chicagoland
Posts: 1,003
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by pentavolvo
so i see u have one crossover mounted on the amp rack, wheres the other
That's for his sails, I believe... 4 in, 4 out
Old 02-23-2008, 04:06 PM
  #27  
TECH Fanatic
Thread Starter
iTrader: (3)
 
cws T/A's Avatar
 
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts
Default

The one on the amp board works both midbass . Only highs in the car is the RE components in the doors ,there crossovers are in the kick panels . With the sub turned off , it still sounds great .

When I was pulling out the factory speakers , the original owner of the car must have removed one of the midbass speaker . Other was blown .
Old 02-23-2008, 04:15 PM
  #28  
TECH Junkie
iTrader: (28)
 
whytryz28's Avatar
 
Join Date: Feb 2007
Location: Hawaii
Posts: 3,757
Likes: 0
Received 2 Likes on 2 Posts

Default

my computer subwoofer went crazy when i played your vids lol
Old 02-23-2008, 04:29 PM
  #29  
TECH Fanatic
Thread Starter
iTrader: (3)
 
cws T/A's Avatar
 
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts
Default

To hear it better without the computers woofer blowing out use some headphones pressed against your ears , I found it to sound similar to the real deal this way . Still the camera mic is being taxed when ever the volume comes up .
Old 02-23-2008, 05:41 PM
  #30  
TECH Fanatic
Thread Starter
iTrader: (3)
 
cws T/A's Avatar
 
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts
Default

Well I need to get an higher amp alternator asap , finish the big 3 . Voltage is dropping pretty bad when its full tilt { 3/4 volume }.

Made some more videos , just waiting for them to upload .
Old 02-23-2008, 09:10 PM
  #31  
TECH Fanatic
Thread Starter
iTrader: (3)
 
cws T/A's Avatar
 
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts
Default

Turn your bass DOWN before playing videos .

{That whistling noise you hear when I start the car is the floater plate/ Textralia exo - skel dual disk . Only makes that noise when the clutch is pressed in .}

















Serious Camera overload .. song is not skipping .


Last edited by cws T/A; 02-24-2008 at 01:13 AM.
Old 02-23-2008, 10:49 PM
  #32  
TECH Senior Member
 
2MuchRiceMakesMeSick's Avatar
 
Join Date: Apr 2004
Location: Texas
Posts: 6,157
Likes: 0
Received 0 Likes on 0 Posts
Default

Nice setup but I would probably relocate this ground...but then again, im **** about grounds





All times are GMT -5. The time now is 06:14 AM.