What couplings are you guys using on the 102 TB's?
#4
TECH Resident
iTrader: (24)
I have the FAST 102 Intake and TB and used this first:
http://intakehoses.com/Merchant2/mer...egory_Code=SC4
Fitment sucked and it was really hard to take lid off/on.
So then I switched to this:
http://intakehoses.com/Merchant2/mer...ory_Code=CACH5
Worked perfectly. And allows for better flex due the angle. between TB and Lid.
http://intakehoses.com/Merchant2/mer...egory_Code=SC4
Fitment sucked and it was really hard to take lid off/on.
So then I switched to this:
http://intakehoses.com/Merchant2/mer...ory_Code=CACH5
Worked perfectly. And allows for better flex due the angle. between TB and Lid.
#5
TECH Veteran
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
^ You fit a 4" hose on the 102 TB ok? Or are you the one that's running a 92mm tb? My 102 OD is 4.5".
I've got the same 4" x 6" long ducting and I was wanting the flex pipe. There is an angle from the TB to the lid and I was worried about my lid being "torqued" loose.
I've got the same 4" x 6" long ducting and I was wanting the flex pipe. There is an angle from the TB to the lid and I was worried about my lid being "torqued" loose.