1979 Malibu Wagon (denmah edition)
#1
1979 Malibu Wagon (denmah edition)
Picked up this GEM! from my friend
game over 6.0 and 80e
first test fit, dropped in 80e and engine, only thing in the way is a lower step, in the bac of the K mebmer, well, i have a plasma cutter so that is nothing haha
plenty of room to drop the pan right down in there now
80e and 6.0 drops right in, so ****** easy, i am in love already haha
made engine mounts that go right into the stock SBC clamshells on the k member out of spare metal
oh ****, going to be a close one!
**** yeah it fits with some intake and hood mods! Under the stock hood!
modded the stock crossmember for the trans, bolted right in!
Introduction to the malibu
http://www.youtube.com/watch?v=5wR4K...ature=youtu.be
engine and trans installed!
http://www.youtube.com/watch?v=Hq7RA...ature=youtu.be
game over 6.0 and 80e
first test fit, dropped in 80e and engine, only thing in the way is a lower step, in the bac of the K mebmer, well, i have a plasma cutter so that is nothing haha
plenty of room to drop the pan right down in there now
80e and 6.0 drops right in, so ****** easy, i am in love already haha
made engine mounts that go right into the stock SBC clamshells on the k member out of spare metal
oh ****, going to be a close one!
**** yeah it fits with some intake and hood mods! Under the stock hood!
modded the stock crossmember for the trans, bolted right in!
Introduction to the malibu
http://www.youtube.com/watch?v=5wR4K...ature=youtu.be
engine and trans installed!
http://www.youtube.com/watch?v=Hq7RA...ature=youtu.be
#7
Trending Topics
#16
stock 99 6.0 swapped in alum heads i had and threw out the cast iron ones
ls9 gaskets a friend gave me for free
apline motorsports studs, pac1218 springs
stock cam, stock everything else, going to get a GT45 68mm
a 4l80e and a stock tq converter, with the tried and true transgo HD2 kit
I actually have a stock engine harness, and a ms3, and two projects here, so not sure what one i am going to use on this yet.
ls9 gaskets a friend gave me for free
apline motorsports studs, pac1218 springs
stock cam, stock everything else, going to get a GT45 68mm
a 4l80e and a stock tq converter, with the tried and true transgo HD2 kit
I actually have a stock engine harness, and a ms3, and two projects here, so not sure what one i am going to use on this yet.