Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Stealthy cams?

Thread Tools
 
Search this Thread
 
Old 11-21-2004, 06:11 PM
  #1  
12 Second Club
Thread Starter
 
MachoCamacho's Avatar
 
Join Date: Jul 2004
Location: Mpls, Minnesota
Posts: 479
Likes: 0
Received 0 Likes on 0 Posts
Default Stealthy cams?

Alright, just thinkin bout more future stuff(further than my camaro goes, since by this time it'll be a weekend car), i might end up gettin a GTO, but anyways, what are the peak power/best power bands you've seen out of the stealthier cams, such as the MTI stealth II, the TR 224/224 114(or 112), and such, also torquer if there are any results, and what are the idles like?(stock, lil rougher, lot rougher), any info on any cam is welcome.
Old 11-21-2004, 11:29 PM
  #2  
TECH Senior Member
 
PREDATOR-Z's Avatar
 
Join Date: Mar 2004
Location: BFE
Posts: 14,620
Likes: 0
Received 16 Likes on 16 Posts

Default

MTI Stealth II here, my hp peaks at 5900 and carries 400+hp all the way to ~6400 where it starts dipping slightly. I shift at 6600.
Old 11-21-2004, 11:46 PM
  #3  
12 Second Club
Thread Starter
 
MachoCamacho's Avatar
 
Join Date: Jul 2004
Location: Mpls, Minnesota
Posts: 479
Likes: 0
Received 0 Likes on 0 Posts
Default

cam+bolt ons only right?
Old 11-21-2004, 11:49 PM
  #4  
12 Second Club
 
Ryan1985's Avatar
 
Join Date: Oct 2004
Location: Arlington,TX
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts
Default

i would also like more info. Im going to look into one of those cam.
Old 11-22-2004, 12:46 AM
  #5  
TECH Apprentice
 
boosted03cobra's Avatar
 
Join Date: Jan 2003
Location: houston
Posts: 337
Likes: 0
Received 0 Likes on 0 Posts

Default

those stealth cams from mti are bad *** my bud has one his ss he made 391rwhp with a stealth2 and bolt ons
Old 11-22-2004, 12:51 AM
  #6  
TECH Senior Member
 
PREDATOR-Z's Avatar
 
Join Date: Mar 2004
Location: BFE
Posts: 14,620
Likes: 0
Received 16 Likes on 16 Posts

Default

Originally Posted by MachoCamacho
cam+bolt ons only right?
Yes full bolt ons including pulley, ported LS6, 80mm TB, FIPK, MACs (port matched with modified collector),Stock heads (241) but with light valvetrain and this was with TC locked, open cutout and of course free mods + tuning , stock de-screened MAF.(only thing missing is EWP)
One thing I have to say is here we run 98 octane premium gas which enables me to run over 30* advance timing with no KR, TR6 plugs. (I shoot up to 200 dry on occasions )
Old 11-22-2004, 01:54 AM
  #7  
10 Second Club
iTrader: (2)
 
Drew778's Avatar
 
Join Date: Feb 2002
Location: Hawaii
Posts: 866
Likes: 0
Received 0 Likes on 0 Posts
Default

Do auto's need tuning for the stealth II?
Old 11-22-2004, 02:10 AM
  #8  
TECH Senior Member
 
PREDATOR-Z's Avatar
 
Join Date: Mar 2004
Location: BFE
Posts: 14,620
Likes: 0
Received 16 Likes on 16 Posts

Default

No, but to optimise output yes.
When I fired it up it took about 5 min for it to idle almost normally. But you have to tune shift points and adjust AFR, that was about it.
Only an experienced ear could tell it wasn't stock like, it does lope a little if you decrease idle but I guess every cam lopes LOL.




All times are GMT -5. The time now is 10:17 PM.