Jakester136

I have $1000 left to mod my car right now. So far i have headers, billet grill,black stripes. What do I get??? SS hood, Rims, Cam, ls6 intake+ rims? I just dont know what to do. Surely theres been others in this situation and what have they done. Thanks
-Jake

1998LS1SS

iTrader: (8)

ls6 intake and some black or chrome zr1's 11" wide out back would give you the perfect stance.

my01ws6

iTrader: (16)

Nitrous

99camarosupersport

iTrader: (6)

If you must, rims and nitrous.

Otherwise, bank.

Jakester136

O yes......I mUst!!

green28

iTrader: (8)

I'd stay away from the SS hood if you already bought stripes. But out of you list I'd go for rims and LS6 intake.

Jakester136

Thats what im thinkn' bad ace rims and ls6 intake for a little performance. Is the intake hard to put on..heard it was easy but havent looked into it in detail

Jakester136

still open to opinions and any other good ideas.

camaro-94-z28

iTrader: (3)

nitrous

SSmokin99

iTrader: (7)

I would get some rims and the intake. The LS6 intake is pretty easy install. Your arms are gonna look like you got in a fight with a cactus

WhosNXT

You could buy a ls6 and cam, pushrods, springs and gaskets for under 1k. Thats a bare bones cam swap. If you wanted a new timing set, ported oil pump, lifters, it would set you over 1k and you would still need a new tune. So I would say go Ls6 intake, FTRA, and a tune. You would still need a retune when you get a cam, but many shops do not charge alot to update tunes. This will give you good bang for the buck, because the tune will allow you to gain hp from the tune and also more hp out of you mods giving you the most for your money.

ReFtheMC

iTrader: (6)

I say a new hood, it would be a great appearance mod

Disturbed Bird

iTrader: (9)

cam,spings.pushrods, tune

99camarosupersport

iTrader: (6)

It would be hard to get all that under a grand. Very hard...

1FAST02FORMULAHAWK

iTrader: (8)

I think some sponsors are running a F.A.S.T 90/90 combo for close to a grand right now deffinately worth the money

WhosNXT

He will gain more hp with the mods I listed for 1k than with a fast 90/90 with factory H/C.

408zo6

+2

Jakester136

Do you think I could get a cam and have someone install it for $1000

09CPTN

iTrader: (5)

^^^Probably not. Most shops will prolly charge you at least $800 just for the install. It's a lot of labor. You don't hafta drop the motor, but a lot of shops want to. Best bet is to do it yourself with someone who's done it before.

CJDZ24_Z28

iTrader: (75)

LS6 intake and a tune. A cam will be well over $1000 when you add in the tune and all other supporting parts pushrods,gaskets etc. My cam, cam install with tune was well over 1700 at one of the best priced shops and sponsors here