12 Second Club In the 12s yet? Come inside!

In the 12's now with ls6 conversion

Thread Tools
 
Search this Thread
 
Old 07-03-2011 | 05:10 PM
  #1  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default In the 12's now with ls6 conversion

I have an 02 trans am with ws6 hood and lower air box, lid, P/P/T/B(with bypass) A.I.R. delete, 243 heads, 02 z06 cam pacesetter LT and ORY, flowmaster catback, panhard bar kyb agx rear shocks(only suspension upgrades) crap tires and a frost tune.

the first week out my best e/t was 12.89 best trap was 111,
this past friday was a lil bit better. I did take my carpet out to clean it so i said what the hell let me go run it, I had to let it dry any way. Other than that I have not had the back seat in for a wile and I take my spare and jack out when I go to the track. My best this past friday was 12.79@109.50 D/A 1325
60 2.075
330 5.534
1/8 8.323@88.57
1/4 12.797@109.5
My 1/4 trap seems low to me on average i only gain 21-22mph on the big end.
Yes a stall is in my future.
Old 07-03-2011 | 08:09 PM
  #2  
s346k's Avatar
TECH Junkie
iTrader: (4)
 
Joined: May 2005
Posts: 3,433
Likes: 1
From: johnson co.
Default

has the car been tuned? that thing is way down on power.
Old 07-03-2011 | 08:13 PM
  #3  
tomstark's Avatar
On The Tree
iTrader: (2)
 
Joined: Mar 2011
Posts: 130
Likes: 0
From: MN
Default

60' isn't very good. Are you spinning a lot on launch?
Old 07-03-2011 | 09:29 PM
  #4  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

Originally Posted by s346k
has the car been tuned? that thing is way down on power.
frost tune...Yea My trap is lower than I expected
Old 07-03-2011 | 09:33 PM
  #5  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

Originally Posted by tomstark
60' isn't very good. Are you spinning a lot on launch?
Crap tires, I don't spin much but I am soft out of the hole so I don't spin.
With my tires the best 60 I have had was a 1.9 so ill sort that out on down the road.
Old 07-03-2011 | 09:40 PM
  #6  
tomstark's Avatar
On The Tree
iTrader: (2)
 
Joined: Mar 2011
Posts: 130
Likes: 0
From: MN
Default

Ok, traction on launch will help a lot, lol. Going to put a cam in sometime?
Old 07-03-2011 | 10:09 PM
  #7  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

Originally Posted by tomstark
Ok, traction on launch will help a lot, lol. Going to put a cam in sometime?
yea ill be saving up over the winter for some suspension. Spring...tires, stall, and hopefully a 12 or 9" by the end of next summer. Cam... I dunno I might go turbo one day might not, not sure yet. I need to make up my mind first, that is why I am not going to be putting a stall in till next year.
Old 07-03-2011 | 10:17 PM
  #8  
HioSSilver's Avatar
10 Second Club
20 Year Member
iTrader: (8)
 
Joined: Aug 2002
Posts: 5,977
Likes: 486
From: Winchester, VA
Default

I don't know how the ls6 conversion you have would compare to a crate ls6 like I have (#'s in the sig). I would think the tune is way off or something is wrong. My bolt-on ls1 went better than your ls6 conv. Funny part is the stock tune should be pretty close to a ls6....atleast mine was.
Old 07-03-2011 | 10:33 PM
  #9  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

Originally Posted by HioSSilver
I don't know how the ls6 conversion you have would compare to a crate ls6 like I have (#'s in the sig). I would think the tune is way off or something is wrong. My bolt-on ls1 went better than your ls6 conv. Funny part is the stock tune should be pretty close to a ls6....atleast mine was.
You would think it would not be much different if any at all. I have checked every thing and the mech end is fine
Old 07-03-2011 | 10:39 PM
  #10  
HioSSilver's Avatar
10 Second Club
20 Year Member
iTrader: (8)
 
Joined: Aug 2002
Posts: 5,977
Likes: 486
From: Winchester, VA
Default

Get rid of the flowmaster for starters. Mine really liked it when I went to a single 6" round dynomax 3.5" muffler over the optional slp SS exhaust.
Old 07-03-2011 | 10:42 PM
  #11  
HioSSilver's Avatar
10 Second Club
20 Year Member
iTrader: (8)
 
Joined: Aug 2002
Posts: 5,977
Likes: 486
From: Winchester, VA
Default

Are you getting any knock retard?
Old 07-04-2011 | 01:56 AM
  #12  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

No codes, and I am going to a flowmaster merge (2)3-4 and a cut out.
Old 07-04-2011 | 02:01 AM
  #13  
silverz28camaro's Avatar
TECH Fanatic
iTrader: (20)
 
Joined: Sep 2008
Posts: 1,944
Likes: 1
From: st.louis
Default

what was the temp.? Maybe heat is just costing you time? My times from spring and fall vs mid summer vary by .3
Old 07-04-2011 | 02:06 AM
  #14  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

what do you think I should be trapping at 115-118?
Old 07-04-2011 | 12:44 PM
  #15  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

Originally Posted by silverz28camaro
what was the temp.? Maybe heat is just costing you time? My times from spring and fall vs mid summer vary by .3
about 80 DA was 1325
Old 07-04-2011 | 12:50 PM
  #16  
s346k's Avatar
TECH Junkie
iTrader: (4)
 
Joined: May 2005
Posts: 3,433
Likes: 1
From: johnson co.
Default

i'd be looking for 115 at least.

for comparison sake, my lid/muffler m6 car went 8.29 @ 88 with a da of 2250'. granted, that is not the norm et for a stockish m6 car, the trap is close to what others do. it's a 99 car on stock everything; clutch, slave, master, intake, tb, etc etc etc. literally 2 mods. i'd be straight up pissed if i did all that work and gained 1 mph in the 1/8 and nothing in the 1/4...
Old 07-04-2011 | 01:33 PM
  #17  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

How inaccurate is the factory tach? It shows It shifting at 6100, but its suppose to be 65, speedo off a bit as well. I gained
4-5mph from this conversion.
Old 07-04-2011 | 01:55 PM
  #18  
silverz28camaro's Avatar
TECH Fanatic
iTrader: (20)
 
Joined: Sep 2008
Posts: 1,944
Likes: 1
From: st.louis
Default

Get a 3200-3600 yank ss converter and bump up the shift point 200 rpms if ylou are shifting at 6100
Old 07-04-2011 | 02:54 PM
  #19  
Frost's Avatar
FormerVendor
iTrader: (45)
 
Joined: Jul 2005
Posts: 5,913
Likes: 2
From: Richmond VA
Default

Originally Posted by theskitztikwon
How inaccurate is the factory tach? It shows It shifting at 6100, but its suppose to be 65, speedo off a bit as well. I gained
4-5mph from this conversion.
Shoot me an email with your full name so that I can look up your file. If the car is shifting at 6100, that's where the MPH is being lost, or quite a chunk of it.
Old 07-04-2011 | 04:04 PM
  #20  
theskitztikwon's Avatar
Thread Starter
TECH Enthusiast

iTrader: (18)
 
Joined: Jul 2009
Posts: 520
Likes: 3
From: montgomery alabama
Default

email sent thanx



All times are GMT -5. The time now is 08:30 PM.