402 with itb's headed for the engine dyno-updated 700.1hp
#1
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
402 with itb's headed for the engine dyno-updated 700.1hp
this is a street 402 i built for a friend of mine-it should be a pretty bad piece,it's heading for the engine dyno this week.here is a rundown.i'm shooting for 700hp on pump gas-if it doesn't make it first time,i'll change some things and try it again
iron block 4.005 bore
callies compstar crank and rods
custom je pistons coated on crowns and skirts(alot of compression)
trickflow 235's with a little hand work
big hyd roller
lunati link bar lifters
harrop itb's
meziere electric wp
melling hv oil pump
ati balancer
iron block 4.005 bore
callies compstar crank and rods
custom je pistons coated on crowns and skirts(alot of compression)
trickflow 235's with a little hand work
big hyd roller
lunati link bar lifters
harrop itb's
meziere electric wp
melling hv oil pump
ati balancer
Last edited by Shawn @ VA Speed; 02-06-2010 at 06:24 PM.
Trending Topics
#9
TECH Fanatic
iTrader: (10)
Join Date: Dec 2003
Location: omaha, NE
Posts: 1,004
Likes: 0
Received 0 Likes
on
0 Posts
whats this going in? if you guys have problems finding filters theres a guy in here that had something that seemed to work and also there is a mesh screen version that i have on my harrop intake that works as well. however you'll have to chop off that silly plate from all the stacks.
#11
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
cable-going in an f body
whats this going in? if you guys have problems finding filters theres a guy in here that had something that seemed to work and also there is a mesh screen version that i have on my harrop intake that works as well. however you'll have to chop off that silly plate from all the stacks.
#12
Banned
iTrader: (2)
whats this going in? if you guys have problems finding filters theres a guy in here that had something that seemed to work and also there is a mesh screen version that i have on my harrop intake that works as well. however you'll have to chop off that silly plate from all the stacks.
Dyno numbers?
.
#14
TECH Resident
iTrader: (6)
Join Date: Jul 2004
Location: West Palm Beach fl usa
Posts: 934
Received 0 Likes
on
0 Posts
Looking very nice from the stand...and that engine must have some power.
I am curious to see how much will be lost with air filters and air boxes on when implanted in the car...
Waiting to read the results.
Christian
I am curious to see how much will be lost with air filters and air boxes on when implanted in the car...
Waiting to read the results.
Christian