Where can I get Fuel Rail Covers?
#1
Teching In
Thread Starter
Join Date: Mar 2002
Location: Baltimore
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I went to my local chevy dealer and they were unable to locate any fuel rail covers in their parts computer for either the F-body cars or the Vettes. I know... doesnt make sense.
Where can I get them online?
Where can I get them online?
#2
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Try our offical GM parts sponsor, by clicking the botton on the right for SDPC >>>>>>>>>
Or try,www.gmpartsdirect.com
The part numbers are 12556455 & 12556261 for the genuine GM parts.
You could also try Fast Toys (our sponsor) for the custom covers. A little pricey but at least don't say "Corvette" on them.
Or try,www.gmpartsdirect.com
The part numbers are 12556455 & 12556261 for the genuine GM parts.
You could also try Fast Toys (our sponsor) for the custom covers. A little pricey but at least don't say "Corvette" on them.
#3
Teching In
Thread Starter
Join Date: Mar 2002
Location: Baltimore
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
THanks Xsta Z28 - I checked Fast toys and your right they are pricey. I also checked the gmpartsdirect and I think you might have given me the wrong part #'s
12556455 = Fuel Injection Hardware cover (1 piece)
for $18.39 (Sounds to cheap) without
any pictures avail, Im not sure this is
the two piece fuel rail covers.
12556261 = Heater $12.02 (hmmmmm)
Now I did a search for cover under corvette and found these:
12561502 = Fuel Injection Hardware Right Cover
$21.97. (This sounds about right to me)
12561503 = Fuel Injection Hardware Left Cover
$21.97
Im assumeing these must be the Fuel Rail Covers. And I guess they're the ones that have Corvette engraved. Which is no big deal, I can fill it in and paint'm if it'll save me money by doing it this way.
Can you or anyone verify that I am in deed looking at the right parts before I order them. Thanks. Oh, one other thing... Does it make a difference on the year of the Vette for covers on my 2002 Hawk?
<small>[ June 19, 2002, 10:21 AM: Message edited by: RobIVPush33 ]</small>
12556455 = Fuel Injection Hardware cover (1 piece)
for $18.39 (Sounds to cheap) without
any pictures avail, Im not sure this is
the two piece fuel rail covers.
12556261 = Heater $12.02 (hmmmmm)
Now I did a search for cover under corvette and found these:
12561502 = Fuel Injection Hardware Right Cover
$21.97. (This sounds about right to me)
12561503 = Fuel Injection Hardware Left Cover
$21.97
Im assumeing these must be the Fuel Rail Covers. And I guess they're the ones that have Corvette engraved. Which is no big deal, I can fill it in and paint'm if it'll save me money by doing it this way.
Can you or anyone verify that I am in deed looking at the right parts before I order them. Thanks. Oh, one other thing... Does it make a difference on the year of the Vette for covers on my 2002 Hawk?
<small>[ June 19, 2002, 10:21 AM: Message edited by: RobIVPush33 ]</small>
#4
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
HMMMM, may be that one number I put down is wrong. You need to make sure you get fuel rail covers for an older C5 Corvette, since the newer ones only have on fuel line slot, and we need two.
Here are new numbers I got from a differnt board.
12556455 + 12559261 Fuel rail covers Looks like I put in a "6" where it should be a "9"
Here are new numbers I got from a differnt board.
12556455 + 12559261 Fuel rail covers Looks like I put in a "6" where it should be a "9"
#5
Copy & Paste Moderator
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
RobIVPush33:
The PN's that XstaZ28 listed should be the FRCs cut for 2 fuel lines (The ones you want for an F-body). I think the PN's you found are the later ones that are cut for only one fuel line.
--VIP1
The PN's that XstaZ28 listed should be the FRCs cut for 2 fuel lines (The ones you want for an F-body). I think the PN's you found are the later ones that are cut for only one fuel line.
--VIP1
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a set of the 12561502--12561503 on the way should be here this week.I will post a picture of them.They are supposed to be black and have two slots on drivers side.Will let you know.
Eddy in Iowa
Eddy in Iowa
#7
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
P/N 12559261 (97-98) LH Fuel Rail Cover $24.97 ea
P/N 12556455 (97-98) RH Fuel Rail Cover $24.97 ea
P/N 12561503 (99-02) LH Fuel Rail Cover $28.97 ea
P/N 12561502 (99-02) RH Fuel Rail Cover $28.97 ea
(These prices are discount)
BTW, The 97-98 LS1 uses different mount points for there fuel rail covers and there coil pack locations. Do to this change, 99 and later cars cannot use the 97-98 fuel rail covers or vice versa.
Ron,
<small>[ June 23, 2002, 11:35 PM: Message edited by: Kimchee and Rice ]</small>
P/N 12556455 (97-98) RH Fuel Rail Cover $24.97 ea
P/N 12561503 (99-02) LH Fuel Rail Cover $28.97 ea
P/N 12561502 (99-02) RH Fuel Rail Cover $28.97 ea
(These prices are discount)
BTW, The 97-98 LS1 uses different mount points for there fuel rail covers and there coil pack locations. Do to this change, 99 and later cars cannot use the 97-98 fuel rail covers or vice versa.
Ron,
<small>[ June 23, 2002, 11:35 PM: Message edited by: Kimchee and Rice ]</small>
Trending Topics
#8
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Opened the box the e-mail I got from GM parts direct said this one had two notches on drivers side it dont post pictures of yours that do.These are part #12561502--12561503
<img src="http://www.msnusers.com/_Secure/0NAD7d7kRrcIIMY8KNrdt0G3o0zMldBO7SATOPoCOCz236mBtx YTl4Vw727niDlY*LJNWYZwN66aIrQmRcHzQmQ/~ce9-Copy.jpg" alt=" - " />
<img src="http://www.msnusers.com/_Secure/0NAD7d7kRrcIIMY8KNrdt0G3o0zMldBO7SATOPoCOCz236mBtx YTl4Vw727niDlY*LJNWYZwN66aIrQmRcHzQmQ/~ce9-Copy.jpg" alt=" - " />
#9
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thumbs up to GM parts direct They made a mistake and are going to give me full refund.Will be ordering the ones with two slots when they get more in stock.
Eddy
Eddy
#10
Staging Lane
Join Date: May 2002
Location: London, UK
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Which part numbers do you need?
Is it 12556455 & 12559261 and would these be suitable for a 2000 Camaro?
Finally, when did GM say they expect to get more in stock?
Is it 12556455 & 12559261 and would these be suitable for a 2000 Camaro?
Finally, when did GM say they expect to get more in stock?
#11
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by TagUK:
<strong>Which part numbers do you need?
Is it 12556455 & 12559261 and would these be suitable for a 2000 Camaro?
Finally, when did GM say they expect to get more in stock?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Those are the right ones!
<strong>Which part numbers do you need?
Is it 12556455 & 12559261 and would these be suitable for a 2000 Camaro?
Finally, when did GM say they expect to get more in stock?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Those are the right ones!