CETA MOD w/ plasti dip
#1
11 Second Club
Thread Starter
Join Date: Sep 2012
Location: Tulsa, OK
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
CETA MOD w/ plasti dip
Hey guys,
New guy here and new to the f-body's all together. I like the CETA MOD I seen on a few cars so I decided to do it myself with some Plasti-dip. Here are some pics, I hope you guys like it as much as I do.
New guy here and new to the f-body's all together. I like the CETA MOD I seen on a few cars so I decided to do it myself with some Plasti-dip. Here are some pics, I hope you guys like it as much as I do.
#2
TECH Fanatic
Welcome to the site! Kind of blurry pictures, but I did the same to my car and love it.
Trending Topics
#8
TECH Addict
iTrader: (57)
Must be a humidity thing cause I spent 4 hours on mine last weekend down here in the south and the texture came out like non skid, looked like sand was in it. From what I read after the fact, I was spraying too far back (6") and should have held the can more like 4"? However, that is not what the instructions on the can says if memory serves...I had to pull it all off, good thing about this stuff is its easy off if you f'up. Not sure if I'll spend another 4 hours on it again or just use regular rattle can?
#13
11 Second Club
Thread Starter
Join Date: Sep 2012
Location: Tulsa, OK
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I put 4 coats on an ended up using almost 1 can...I will try and get more pics, it is rainy and cloudy here in Oklahoma right now. The key is light coats to get the smoothest look.
#14
On The Tree
Join Date: Feb 2011
Location: Orlando/Tampa
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pics of mine.
https://i.imgur.com/TTPgs.jpg
https://i.imgur.com/jz5YR.jpg
https://i.imgur.com/ats9R.jpg
https://i.imgur.com/zng8e.jpg
https://i.imgur.com/TbUHd.jpg
#17
On The Tree
Join Date: Feb 2011
Location: Orlando/Tampa
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
#19
On The Tree
Join Date: Feb 2011
Location: Orlando/Tampa
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts