99-02 odo, swapped OEM smd leds with white smd leds, +converting odo to OLED screen
09-04-2016, 12:10 PM
#663
Dont have a lot of time to browse this thread, but I am seriously interested in doing something like this. What was the overall cost? Im guess around 300-600$? I would be happy with just the basic layout. I can get FT Numbers on my double din so I would need the DIC upgrade. But I would love to upgrade the look and style of the cluster overall.
The following users liked this post:
jonbutalsoeric (08-04-2019)
09-07-2016, 06:08 AM
#668
Gotta start some where, so booted it up to the config screen to verify everything made it here okay.
I'm excited to get this installed, this will be a fun and very rewarding project. Both guys have to fantastic to speak with, no doubt if I run into any road blocks they are both willing to help get around them. I plan to start this install next weekend due to surgery this weekend. But I may get bored...
I'm excited to get this installed, this will be a fun and very rewarding project. Both guys have to fantastic to speak with, no doubt if I run into any road blocks they are both willing to help get around them. I plan to start this install next weekend due to surgery this weekend. But I may get bored...
09-09-2016, 05:13 PM
#669
not trying to be rude or make a scene or anything but last I checked I was in line before InfiniteReality, It's no big deal. I just want to make sure I'm still on board and don't get forgotten about. Fieroluke and LT4Vert you guys have done a fantastic job on this and I don't want to miss out. 
09-10-2016, 05:22 AM
#670
Success!
I finished coding for the steering wheel interface!
Illumination dimming, cruise buttons, DashComputer interface!
Time to build the second prototype for testing in an actual car!
(Admittedly crappy) videos showing illumination, Dash and cruise interfaces on FB: "Fieros in Germany"...
I finished coding for the steering wheel interface!
Illumination dimming, cruise buttons, DashComputer interface!
Time to build the second prototype for testing in an actual car!
(Admittedly crappy) videos showing illumination, Dash and cruise interfaces on FB: "Fieros in Germany"...
Last edited by Fieroluke; 09-10-2016 at 05:30 AM.
09-11-2016, 02:19 AM
#671
Progress... Success!
I finished coding for the steering wheel interface!
Illumination dimming, cruise buttons, DashComputer interface!
Time to build the second prototype for testing in an actual car!
(Admittedly crappy) videos showing illumination, Dash and cruise interfaces on FB: "Fieros in Germany"...
I finished coding for the steering wheel interface!
Illumination dimming, cruise buttons, DashComputer interface!
Time to build the second prototype for testing in an actual car!
(Admittedly crappy) videos showing illumination, Dash and cruise interfaces on FB: "Fieros in Germany"...
So happy, had to share with you guys!
Last edited by Fieroluke; 09-11-2016 at 03:02 PM. Reason: Updated
09-26-2016, 08:24 AM
#676
Thanks for the compliments guys.
For those who didnt see it in the c6 vette steering wheel thread, heres a vid of Fieroluke's adapter circuit boards that allows the steering wheel controls to work with the dash computer oled resetting the trip meter. Those buttons are also used to set the clock.
For those who didnt see it in the c6 vette steering wheel thread, heres a vid of Fieroluke's adapter circuit boards that allows the steering wheel controls to work with the dash computer oled resetting the trip meter. Those buttons are also used to set the clock.
10-11-2016, 06:02 AM
#679
I need to get off my butt and install mine. Always seems like something takes presidence over the install....and I have no kids! Weekend vacation, finish building my trailer, past weekend was hell fighting on a full suspension rebuild. This coming weekend I'll put the boards in the trailer and go for an inspection, then it'll be on for the DashComputer!
10-11-2016, 08:05 AM
#680
Staging Lane
Join Date: Sep 2010
Location: SC
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
I need to get off my butt and install mine. Always seems like something takes presidence over the install....and I have no kids! Weekend vacation, finish building my trailer, past weekend was hell fighting on a full suspension rebuild. This coming weekend I'll put the boards in the trailer and go for an inspection, then it'll be on for the DashComputer!