T/A Hawk HIDs - PICS
#226
TECH Enthusiast
iTrader: (5)
Join Date: Mar 2005
Location: Louisiana
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
I have this H4 kit. So what wire do I cut and then connect to what wires? Not real concern about the highlight situation. Or im I better off just exchanging it for the H7. H7 HID kit does it require cutting of wire too or is it plug-n-play. And the directions sucks.
KYO Plug-N-Play Heavy Duty Wire Harness Upgrade Kit (Model H4)
Description: Protect your car's factory headlight connector from melting with aftermarket halogen light bulb upgrade.
Part #: KYO-PNP-WH-H4
**click image to make bigger**
KYO Plug-N-Play Heavy Duty Wire Harness Upgrade Kit (Model H4)
Description: Protect your car's factory headlight connector from melting with aftermarket halogen light bulb upgrade.
Part #: KYO-PNP-WH-H4
**click image to make bigger**
#227
hey guys...i have been tryin to find a good HID kit to put in my WS6 and im at work while reading this so i dont have time to check out the whole thread, but LEDgauges.com sells a trans am HID kit with the housings included...just in case some of u didnt wanna mess with buying everything and putting it all together...if anyone has it or has suggested it, sorry for the repost....
PS...if anyone does have the setup from them, are u happy with it???
PS...if anyone does have the setup from them, are u happy with it???
#234
Copy & Paste Moderator
I also know from experience. My mother's 2004 Sonata uses them and I made my own conversion housings once.
#235
TECH Senior Member
iTrader: (2)
That's was my first thought, but I wasn't sure, so I googled the H7 and saw a dual filament bulb. I remember the GTO's used H7. Hell, H7 is what I converted MY TA housings to (I just forgot). Stupid Google. I should have looked at several pics before assuming the 1st image was correct.
So the Eurolamps housing should be H7.
So the Eurolamps housing should be H7.
#239
TECH Resident
iTrader: (7)
Join Date: Feb 2007
Location: Visalia, Ca
Posts: 993
Likes: 0
Received 0 Likes
on
0 Posts
the Hid's for ledgauges.com fit perfect took about 45 min to install very simple to hook up.. everything is inc i can actually see at night now. and i havnt been flashed once i also have mine pointed way down and there still hella bright