Engine done..Need a converter who should I go to to spec something
#1
Engine done..Need a converter who should I go to to spec something
My engine is done and now I need a converter so I can put the engine in the car. I have dealt with Coan Racing for awhile now but I don't know how there converters are going to be with my setup. The last time I talked to them about an EFI car, they spec'd out a 2800 converter and when I yanked it out and threw in a 4000 stall it was faster on motor and N/A.
I have been leaning towards Circle D or FTI for my car but I see that Yank is the choice for alot of street guys. I just want to make sure that I get somebody that knows what I want out of my car and not spec me something just to get my money.
Coan has done me good on all the transmissions I have bought from them over the years and I have a nitrous converter from them that is a bad *** converter. It has worked flawlessly but it is for a carb'd small block. I don't think they take in consideration of the weight of the street cars I have built.
So, basically I just need a few of you guys to recommend me a good converter company that is going to give me what I need.
I put this in the nitrous section also since I will be spraying a hefty amount
I have been leaning towards Circle D or FTI for my car but I see that Yank is the choice for alot of street guys. I just want to make sure that I get somebody that knows what I want out of my car and not spec me something just to get my money.
Coan has done me good on all the transmissions I have bought from them over the years and I have a nitrous converter from them that is a bad *** converter. It has worked flawlessly but it is for a carb'd small block. I don't think they take in consideration of the weight of the street cars I have built.
So, basically I just need a few of you guys to recommend me a good converter company that is going to give me what I need.
I put this in the nitrous section also since I will be spraying a hefty amount
#2
On The Tree
Join Date: Aug 2011
Location: Lakeland, Fl
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Go with FTI. They are really great to work with. I talked with Greg to spec mine out and he answered all of my questions without making me feel like a dumb ***! (even though he knew I was when it comes to converters)
#5
That's a pretty rowdy combination. I would suggest giving Chris or Greg a call. Both guys are on top of their game and both push the envelope.
I would be concerned about the 350 being able to survive long term in that car. I'm guessing the motor makes somewhere between 450 and 500 n/a. The direct port is probably a 200-250 shot and the nozzle is around 150. That's asking a lot from a th350.
g
I would be concerned about the 350 being able to survive long term in that car. I'm guessing the motor makes somewhere between 450 and 500 n/a. The direct port is probably a 200-250 shot and the nozzle is around 150. That's asking a lot from a th350.
g
#6
11 Second Club
iTrader: (8)
Join Date: Jan 2002
Location: SILSBEE TX
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
I am sure " Chris or Greg " are great at specing out the correct TC you need.
Dave with Yank has twice did very good when specing both a ST 3600/2.3 and a SS 4000/?? and both did as planed
just my .02s Johnny
Dave with Yank has twice did very good when specing both a ST 3600/2.3 and a SS 4000/?? and both did as planed
just my .02s Johnny
#7
TECH Enthusiast
iTrader: (1)
That's a pretty rowdy combination. I would suggest giving Chris or Greg a call. Both guys are on top of their game and both push the envelope.
I would be concerned about the 350 being able to survive long term in that car. I'm guessing the motor makes somewhere between 450 and 500 n/a. The direct port is probably a 200-250 shot and the nozzle is around 150. That's asking a lot from a th350.
g
I would be concerned about the 350 being able to survive long term in that car. I'm guessing the motor makes somewhere between 450 and 500 n/a. The direct port is probably a 200-250 shot and the nozzle is around 150. That's asking a lot from a th350.
g
That's more like 600+ @ the flywheel with that combo on motor. He probably isn't spraying more than 250 total with those L92 heads, but, you are right, that TH350 is on borrowed time depending on the build and vehicle weight.
Trending Topics
#9
What's most important is to speak to a few builders and go with that guy you feel like you can work with long term. Relationships are everything.
g
#10
On The Tree
iTrader: (11)
Join Date: May 2011
Location: Edgewater FL. but, Jersey for life!
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
I went FTI for mine and Greg was awesome. let me come over and walk the shop. described the process to me and didn't treat me like a moron. also gave me a great deal and i am VERY satisfied with his work.
#11
That's a pretty rowdy combination. I would suggest giving Chris or Greg a call. Both guys are on top of their game and both push the envelope.
I would be concerned about the 350 being able to survive long term in that car. I'm guessing the motor makes somewhere between 450 and 500 n/a. The direct port is probably a 200-250 shot and the nozzle is around 150. That's asking a lot from a th350.
g
I would be concerned about the 350 being able to survive long term in that car. I'm guessing the motor makes somewhere between 450 and 500 n/a. The direct port is probably a 200-250 shot and the nozzle is around 150. That's asking a lot from a th350.
g
Don't discredit these TH350's we have a kitchen table built one that is sitting behind a 565 flywheel hp small block that gulps down a 300 shot. It runs like a bat out of hell.
#14
11 Second Club
iTrader: (2)
Join Date: Oct 2008
Location: maryland
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
id go with a FTI just ordered my second billet converter from them. First one was a bolt on full weight lt1 with 3.23 gear cuts consistent 1.68 60's. I just ordered a 4000 for my ls1 hoping to get in the 1.5's
#15
That's just who I went with. They called me and told me what I needed and why I needed it. He told me "you will not break this converter and it will only need adjustments, so it will be the only converter you will have to buy" and i was sold because I only like buying things once, even though it might cost more.