Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Vss color wires

Thread Tools
 
Search this Thread
 
Old May 3, 2018 | 02:55 PM
  #1  
litle88's Avatar
Thread Starter
12 Second Club
15 Year Member
iTrader: (20)
 
Joined: Jan 2007
Posts: 2,561
Likes: 4
From: Burbank, Illinois
Default Vss color wires

ive been searching, Im doing an m6 to th400 swap.

What are the colors of the vss sensor? Anyone?

thabks in advance.
Reply
Old May 3, 2018 | 06:00 PM
  #2  
Jays_SSZ28's Avatar
Banned
iTrader: (2)
 
Joined: Aug 2009
Posts: 2,223
Likes: 56
Default

green and purple. Always twisted together throughout the loom.
At least thats a ton of gm vehicles.
Is it a secret as to what you're asking about?
Reply
Old May 3, 2018 | 06:10 PM
  #3  
Jays_SSZ28's Avatar
Banned
iTrader: (2)
 
Joined: Aug 2009
Posts: 2,223
Likes: 56
Default

Not just guessing, only assuming. Assuming it's an f body.
Reply
Old May 3, 2018 | 11:10 PM
  #4  
litle88's Avatar
Thread Starter
12 Second Club
15 Year Member
iTrader: (20)
 
Joined: Jan 2007
Posts: 2,561
Likes: 4
From: Burbank, Illinois
Default

Ok thanks I did it and we’ll see tomorrow.

One other question, I tried firing it up and the car will not crank. I have fuel pressure but no cranking. Any suggestions?
Reply
Old May 4, 2018 | 06:22 AM
  #5  
Jays_SSZ28's Avatar
Banned
iTrader: (2)
 
Joined: Aug 2009
Posts: 2,223
Likes: 56
Default

The neutral safety switch wires probably aren't connected.
Reply
Old May 4, 2018 | 06:44 AM
  #6  
litle88's Avatar
Thread Starter
12 Second Club
15 Year Member
iTrader: (20)
 
Joined: Jan 2007
Posts: 2,561
Likes: 4
From: Burbank, Illinois
Default

Originally Posted by Jays_SSZ28
The neutral safety switch wires probably aren't connected.
which wires are those? Thanks
Reply
Old May 4, 2018 | 10:24 AM
  #7  
Jays_SSZ28's Avatar
Banned
iTrader: (2)
 
Joined: Aug 2009
Posts: 2,223
Likes: 56
Default

What vehicle?
Reply
Old May 4, 2018 | 10:27 AM
  #8  
Jays_SSZ28's Avatar
Banned
iTrader: (2)
 
Joined: Aug 2009
Posts: 2,223
Likes: 56
Default

Thats a hell of a modification list to not know anything about a neutral safety switch.
Those are the two wires that go to the switch that your clutch pedal would depress when you put it on the floor.
Those are green and purple too believe it or not.
Reply
Old May 4, 2018 | 10:33 AM
  #9  
Jays_SSZ28's Avatar
Banned
iTrader: (2)
 
Joined: Aug 2009
Posts: 2,223
Likes: 56
Default

I posted this december 2010
https://ls1tech.com/forums/showpost.php?p=14205407&postcount=87
Originally Posted by Jays_SSZ28
The switch on the left is the stock switch.
The dark green and purple wires are the neutral safety.
The light green and brown are for the reverse lights.
IIRC.

Reply




All times are GMT -5. The time now is 05:02 PM.