YANK's NEW PRODUCT LS/1 400 transmission
#1
YANK's NEW PRODUCT LS/1 400 transmission FIRST LOOK!!
YANK is always looking to improve the LS-1 line, and now we have done it again:
Yank has taken the th400 and reworked the weak belhousing area and given back the structure that is lost when you install a th400 to the ls-1 block
when you install a th400 to the ls1 engine you loose the bolting together of the belhousing to the oil pan, this is important as the center line of the enging and the stock th400 transmission will flex under load and cause a misalignment.
This will damage the transmission front pump and cause uneven wear on the converter hub and leaking (under high load as transbrake use)
Yank have tested this and found that transmission life is extended as the input shaft is kept in alignment to the engine is allows
your clutch packs to lockup on center!
NOTE: you can use any th400 transmission for this conversion.
There are 2 kits 1 is a lock-up and the other non lock-up
lock up kit includes:
A, custom front th400 pump with lock-up control valve body (shown)
B, billet input shaft - to handle high power levels
C, belhousing adaptor fits stock 4L60-E belhousing
D, Converter Lock-up any stall speed
F, complete instructions
Non lock-up kit
A, custom th400 pump with 4L60-E adaptor installed
B, Converter your choice of stall speed
C, instructions
Call us for details and pricing will be posted soon
Thank's for looking
and any input is welcome
Yank has taken the th400 and reworked the weak belhousing area and given back the structure that is lost when you install a th400 to the ls-1 block
when you install a th400 to the ls1 engine you loose the bolting together of the belhousing to the oil pan, this is important as the center line of the enging and the stock th400 transmission will flex under load and cause a misalignment.
This will damage the transmission front pump and cause uneven wear on the converter hub and leaking (under high load as transbrake use)
Yank have tested this and found that transmission life is extended as the input shaft is kept in alignment to the engine is allows
your clutch packs to lockup on center!
NOTE: you can use any th400 transmission for this conversion.
There are 2 kits 1 is a lock-up and the other non lock-up
lock up kit includes:
A, custom front th400 pump with lock-up control valve body (shown)
B, billet input shaft - to handle high power levels
C, belhousing adaptor fits stock 4L60-E belhousing
D, Converter Lock-up any stall speed
F, complete instructions
Non lock-up kit
A, custom th400 pump with 4L60-E adaptor installed
B, Converter your choice of stall speed
C, instructions
Call us for details and pricing will be posted soon
Thank's for looking
and any input is welcome
Last edited by Yank; 04-05-2005 at 06:02 PM.
#2
I'm speechless, WOW that is a nice piece of engineering.
Any plans for TH350 Case?
Are you selling bare cases? If so how much $$
How come you guys put the extra bolt hole on the passenger side when the LS1 doesnt have a bolt there? (the one in between the top middle and the side middle)
Any plans for TH350 Case?
Are you selling bare cases? If so how much $$
How come you guys put the extra bolt hole on the passenger side when the LS1 doesnt have a bolt there? (the one in between the top middle and the side middle)
#3
Ls1/th400
Originally Posted by Yank
YANK is always looking to improve the LS-1 line, and now we have done it again:
Yank has taken the th400 and reworked the weak belhousing area and given back the structure that is lost when you install a th400 to the ls-1 block
when you install a th400 to the ls1 engine you loose the bolting together of the belhousing to the oil pan, this is important as the center line of the enging and the stock th400 transmission will flex under load and cause a misalignment.
This will damage the transmission front pump and cause uneven wear on the converter hub and leaking (under high load as transbrake use)
Yank have tested this and found that transmission life is extended as the input shaft is kept in alignment to the engine is allows
your clutch packs to lockup on center!
NOTE: you can use any th400 transmission for this conversion.
There are 2 kits 1 is a lock-up and the other non lock-up
lock up kit includes:
A, custom front th400 pump with lock-up control valve body (shown)
B, billet input shaft - to handle high power levels
C, belhousing adaptor fits stock 4L60-E belhousing
D, Converter Lock-up any stall speed
F, complete instructions
Non lock-up kit
A, custom th400 pump with 4L60-E adaptor installed
B, Converter your choice of stall speed
C, instructions
Call us for details and pricing will be posted soon
Thank's for looking
and any input is welcome
Yank has taken the th400 and reworked the weak belhousing area and given back the structure that is lost when you install a th400 to the ls-1 block
when you install a th400 to the ls1 engine you loose the bolting together of the belhousing to the oil pan, this is important as the center line of the enging and the stock th400 transmission will flex under load and cause a misalignment.
This will damage the transmission front pump and cause uneven wear on the converter hub and leaking (under high load as transbrake use)
Yank have tested this and found that transmission life is extended as the input shaft is kept in alignment to the engine is allows
your clutch packs to lockup on center!
NOTE: you can use any th400 transmission for this conversion.
There are 2 kits 1 is a lock-up and the other non lock-up
lock up kit includes:
A, custom front th400 pump with lock-up control valve body (shown)
B, billet input shaft - to handle high power levels
C, belhousing adaptor fits stock 4L60-E belhousing
D, Converter Lock-up any stall speed
F, complete instructions
Non lock-up kit
A, custom th400 pump with 4L60-E adaptor installed
B, Converter your choice of stall speed
C, instructions
Call us for details and pricing will be posted soon
Thank's for looking
and any input is welcome
I would presume that the bell is not SFI rated?
Thanks,
Buster/BRracing
#4
TECH Enthusiast
Join Date: Aug 2003
Location: Downers Grove,IL
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
looks like you used a stock ls1 4l60e bellhousing with an adapter plate between the case and bellhousing.
Good idea. Might want to just sell the adapter plate for all the guys who already have a th400 installed and may want a stronger setup.
Steve
Good idea. Might want to just sell the adapter plate for all the guys who already have a th400 installed and may want a stronger setup.
Steve
#5
Originally Posted by S_J_H
looks like you used a stock ls1 4l60e bellhousing with an adapter plate between the case and bellhousing.
Good idea. Might want to just sell the adapter plate for all the guys who already have a th400 installed and may want a stronger setup.
Steve
Good idea. Might want to just sell the adapter plate for all the guys who already have a th400 installed and may want a stronger setup.
Steve
we are selling the kits only
not the transmission you do it yourself with parts supplied
so you can use trans with a broken belhousing or one from another car line like a Buick or Pontiac
#6
TECH Veteran
iTrader: (1)
Join Date: Nov 2001
Location: Houston,TX
Posts: 4,167
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GTS346
How come you guys put the extra bolt hole on the passenger side when the LS1 doesnt have a bolt there? (the one in between the top middle and the side middle)
It looks like they are using the stock 4L60e bellhousing that already has that bolt hole.
Looks like a great piece YANK, keep up the good work!
Trending Topics
#13
we have the crossmember kits
http://www.converter.cc/drivetrain.htm
but do not sell any 350 transmissions
as we like the th400 better
http://www.converter.cc/drivetrain.htm
but do not sell any 350 transmissions
as we like the th400 better
#15
TECH Enthusiast
Join Date: Aug 2004
Location: Manhattan, NY
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by oOoLy
Wow... that nice kit .. i will order one for my car soon but what kind of HP do they support?
please give the rwhp #s also, not flywheel
#16
Originally Posted by firechicken2k
i'm interested as well
please give the rwhp #s also, not flywheel
please give the rwhp #s also, not flywheel
and price will adjust to parts needed for your setup
or you can adpt. your th400 to this kit
#17
we now have many models in stock that can ship today!
with or without transbrakes, auto or man. valvebodys also a selection of gear ratios and in lockup of non lock up styles
call us 479 632 6355 Mike mike@converter.cc
with or without transbrakes, auto or man. valvebodys also a selection of gear ratios and in lockup of non lock up styles
call us 479 632 6355 Mike mike@converter.cc
#18
Product Update
Yank has also just introduced a special kit to allow the use of Your stock or replacement 4L60-E drive shaft!
You will not have to replace your carbon fiber or special drive shaft when this kit is orderd or installed with one on our TH400 units
Features of this exclusive Yank item are:
Custom output shaft in the 4L60-E spline
Reworked extention housing so the TH400 is overall the same as the 4L60-E
also included special high RPM seal, and rear bushing with increased oiling
Yank has also just introduced a special kit to allow the use of Your stock or replacement 4L60-E drive shaft!
You will not have to replace your carbon fiber or special drive shaft when this kit is orderd or installed with one on our TH400 units
Features of this exclusive Yank item are:
Custom output shaft in the 4L60-E spline
Reworked extention housing so the TH400 is overall the same as the 4L60-E
also included special high RPM seal, and rear bushing with increased oiling