i need to pick up a new converter and i know my 3800 may be a little too loose

 

i have a yank sc3000....it is a little too tight...2500stall but with a restall it would be perfect. It seems to be efficient up top

 

what tranny do u have? would help us alot

 

4L60. im gonna bring the pain on the poor thing

 

Currently I'm running a 3000.

I noticed from scanning it, the rpms jump by 500 when I flip it from low boost to high boost (5 psi to 11 psi). That's when I'm already turning about 5k.

 

From what I read about a 3000 stall, thats what I am getting on my 4l80e

 

I'm going to try my 4K, but when my tranny goes I plan on doing a th400 swap and will prob lower it to 3K or 3500.

 

I don't think that 4k stall will be that fun and flash really high but worth the try I guess if its already in there. Depends on when the turbo spools too, if its somewhat bigger than it might not be TOO bad. 3500 would be allot better but 3k seems do be the norm.

 

I have a MP with a 1.09 ar, but might go ahead and get a TC76 before I finish up. It prob won't be in there that long N E ways

 

yank py3200 man or vig 3200 triple disk or even call cricle d man they are in your area!!