lq9 injectors on ls6 intake
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You wont be able to use your rails, but with these adapters http://www.corvetteinjectors.com/sho...?productid=252 you can use your injectors.
Mark
Mark
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
TTT
Can anyone else confirm this? I just bought a LS6 intake on here and need injectors and rails for it. I have two sets of truck injectors laying around I could use, and might buy some FAST fuel rails.
Can anyone else confirm this? I just bought a LS6 intake on here and need injectors and rails for it. I have two sets of truck injectors laying around I could use, and might buy some FAST fuel rails.
#6
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The LS1/6 Injectors are about 3/8" longer than the truck injectors. I put LS1 injectors on my truck intake but had to put spacers between the rail holdowns and the intake. I would absolutley think the truck injectors will not work without some kind of custom fuel rail or holddown.
Trending Topics
#9
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
These are the two different sets of injectors I have.
The ones with the larger female end has around 40k on them and the other has 60k
Which ones are you using? Thinking maybe I should just sell both and buy LS1/LS6 injectors but then I would need to buy the connectors to wire into my harness. I have the correct connectors to solder in for either injector I wish to run.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01323.jpg)
The ones with the larger female end has around 40k on them and the other has 60k
Which ones are you using? Thinking maybe I should just sell both and buy LS1/LS6 injectors but then I would need to buy the connectors to wire into my harness. I have the correct connectors to solder in for either injector I wish to run.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01323.jpg)
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01324.jpg)
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I didnt know there was a difference.
I picked up a 02 ls1 that I got most of my sensors and a ls6 intake. The 02 had thrown a rod so I am picking up a 6.0 this weekend. Will the injectors for the ls1 be to small or big to run on the 6.0? Or is a connection issue?
I picked up a 02 ls1 that I got most of my sensors and a ls6 intake. The 02 had thrown a rod so I am picking up a 6.0 this weekend. Will the injectors for the ls1 be to small or big to run on the 6.0? Or is a connection issue?
#12
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not sure for the OP. But for me its more of a concern if I need to buy new injectors and correct injector connector to wire in. I have both injectors pictured above and the connectors and harness to run either one so just curious if they will work with the ls6 intake.
As far as fueling I don't think there would be an issue if everything is stock.
As far as fueling I don't think there would be an issue if everything is stock.
#15
Launching!
iTrader: (1)
Join Date: Apr 2011
Location: Adamsville Tennessee
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have the $99 fuel rails. They're ok, but remember that they take ORB fittings and those can get expensive. I went to Napa and bought their hydraulic ORB's and cost was around $45 for 4 fittings. Then $40 for AN fittings for the fuel cross over hose.
I'm just saying although the rails are cheap the accessories add up!
If you can find a way to reuse your rails go for it as long as your staying stockish. And the truck rails have a regulator on them.
I'm just saying although the rails are cheap the accessories add up!
If you can find a way to reuse your rails go for it as long as your staying stockish. And the truck rails have a regulator on them.
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just got LS1 injectors. Going to go junkyard digging for EV1 connectors before I decide to buy new pigtails to solder in.
Guys think I can get some money outta either of these truck injectors and connectors/pigtails? One set has 60k other around 40k.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01362.jpg)
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01363.jpg)
I have all 8 connectors.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01366.jpg)
Second set.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01367.jpg)
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01371.jpg)
Also have all 8 connectors for these too.
Guys think I can get some money outta either of these truck injectors and connectors/pigtails? One set has 60k other around 40k.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01362.jpg)
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01363.jpg)
I have all 8 connectors.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01366.jpg)
Second set.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01367.jpg)
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01371.jpg)
Also have all 8 connectors for these too.
![](http://i1206.photobucket.com/albums/bb456/RELL88SS/DSC01373.jpg)
#20
11 Second Club
iTrader: (88)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
***Googles the spacers ASAP***
These? http://www.summitracing.com/parts/FST-146025-KIT
I think I'm about to buy fast rails.
These? http://www.summitracing.com/parts/FST-146025-KIT
I think I'm about to buy fast rails.
Vic Jr and Rail setup designed for normal LS1 Injector..
![](http://i103.photobucket.com/albums/m129/the_merv/MCSS/VICJR4.jpg)
You can see the spacers. Takes the LS7(or other short Injector) to the height on a LS1 Injector.