Hooking up throttle cable from Ls1 to original 67 camaro
#1
Hooking up throttle cable from Ls1 to original 67 camaro
What's the easiest way to hook up a throttle cable to my 67 Camaro using my original gas pedal? Pics are always great!
#2
It's been a few years, I used the 99 Camaro throttle cable with a gas pedal from a 70ish Nova with a 6 cyl. The Nova used a cable. Was a complete bolt in with no mods. Might try the conversions section.
#7
11 Second Club
iTrader: (18)
On my Chevelle I used the Lokar cable. Sleeve runs to the firewall and I heated the pedal arm inside and twisted it to fit the cable. (flat part of pedal arm was parallel to the firewall, twisted it so that it's perpendicular)
Be sure to bend the arm front/back enough you get WOT but it bottoms out on the floor or something else so you don't stretch or break the cable.
Be sure to bend the arm front/back enough you get WOT but it bottoms out on the floor or something else so you don't stretch or break the cable.
Trending Topics
The following users liked this post:
Vette-byrd (05-28-2020)
#11
#12
TECH Senior Member