When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finally started putting my car together. 83 cutlass with a 2010 ly6 with mast motorsports ss cam and spring package. rebuilt 4l80 with trans go2, and a strange s60 with 3.73s and s trac. wilwood disc brake package. I used hooker mounts, crossmember, 17/8 long tubes darkside ceramic. waiting on 3 in exhaust, spohn control arms
Finally started putting my car together. 83 cutlass with a 2010 ly6 with mast motorsports ss cam and spring package rebuilt 4l80 with trans go2, and a strange s60 with 3.73s and s trac wilwood disc brake package. I used hooker mounts, crossmember, 17/8 long tubes darkside ceramic waiting on 3 in exhaust, spohn control arms
I like it jimmyg, the orange and black combo looks good.
Yep, I hear you on that one. I resisted signing up on photobucket as long as I could, but I finally had to give in...now the photos are better, but the process takes even longer.
Yes it's a calais it's got sand gray interior, power moon roof. I had one years ago loved it so I kept looking for one. finally found this . It's really clean
Front drive is finished! 2010 camaro water pump, truck ps/alt bracket, holley Ac bracket. Orig ps lines will work
Ls3 intake just sitting there gotta finish heater box first
You are moving along at a good pace jimmyg, nice work. Are your stock A/C lines going to work, or do you have to get parts off of a later model G-body?
I think the Ac lines will work with a little tweaking . The compresser is clocked a little different and is closer to heater box now . I have 2 sets so I was going to try to bend old one to see if it would go then maybe take to Ac shop to have them shorten rubber part of hose. How did u guys connect yours? And also what did u do about plugs being different? Can u order pig tail?
I think the Ac lines will work with a little tweaking . The compresser is clocked a little different and is closer to heater box now . I have 2 sets so I was going to try to bend old one to see if it would go then maybe take to Ac shop to have them shorten rubber part of hose. How did u guys connect yours? And also what did u do about plugs being different? Can u order pig tail?
We used the Aeroquip reusable A/C fittings and hose on our Monte, if your plan doesn't pan out you may want to look into them as they work great. I will check on pigtail info for you tomorrow morning.