1993 Camaro with orginal 4.3 V6 4A trans

I have 2004 Chevy suburban 5.3L 4A with PCM to swap into already

 

I want to see more on this project. I had a 1989 that looked just like the one in the pic (the burgundy one) and really liked the design of the car and always wondered what it would be like RWD.

 

[/I]67 R/S Camaro, '04 LS1 . T-56 , Hooker Super Comp Headers, ATS Conversion Mounts, ATS Crossmember. Turn Key Harness & Tuned ECM

 

GD 427 replica cobra 427
Space frame chassis Ford Brakes suspension independant front rear, sway bars all round
Ls1 engine LS6 inlet GD headers street and performance Harness and ECU mods
T56 Gearbox B&M short shift

 

1965 Chevrolet C10 with installed 2003 SSR 5.3L/4L60e trans
142lb lighter than the iron 283 4BBL and TH350.
starts, runs and drives beautifully...

airdeano

 

1966 Chevelle 300 Delux 2 door sedan, 5.3 from a 2002 Suburban with a TKO 500 using stock mechanical clutch linkage, four wheel disc brakes, Sandlewood tan with the same color interior, (still original). Gonna be carb'd, with MSD ignition, and it's gonna get a 9", (has a 12 bolt now). pics in sig.

 

1992 Chevrolet 1500 4x4 Reg. Cab, short bed
Installed 98 LS1 and A4 Trans out of Firebird
It is now complete, but now I want more power!!!

 

<whispering>

Supercharger...................nitrous............ ......twin turbos..............did I say supercharger?

 

I posted this before when I had a cooling question. Wellt he cooling is sorted out , car is working great , just sorting out the throttle cable , car only opens about 1/2 right now...still verrry fast.

1100Rpm in 4th @ 75mph.

66 Corvair
04 LS1
87 930 Porsche tranny.
JBA headers
Turned intake
No AC
no PS
No BS
Just fun.

 

I saw your car at the GM tech center a few weeks ago, I didn't see the owner. NIIIICCEEE work, A V8 Corvair is on my short list of cars to build in my lifetime.

There was a guy at the Bearing Burners cars this year that had made a LS7 intake and LS7 engine cover setup for his stock motored car. It fooled more than a few people.

 

1993 Mustang GT
2000 LS1
TH400 W/Brake
P1SC-1 Procharger
4.11's with 31 spline axles.
Should be done in 3 weeks.

 

97 s10 pickup 2wd former old school small block truck
swapping in a 2001 lq4 6.0
just bought l92 heads block at machine shop

 

65 Corvette roadster 4 spd Muncie
04 LM4 with same Muncie
Rectangular tube frame by Street Shops with 90 Vette front and rear suspension and Alston Coil overs on all 4 corners
As of 8-13-07 sorting out wiring and fabbing motor mount plates from .75" Aluminum

 

If you have Windows you can go to Microsoft.com and download "Picture Resizer" or you can email them to me and I will gladly do it for ya.

darrin@rottluver.com

 

Emailed ya back. Let me know if you didn't get them.

 

 

1971 Oldsmobile Cutlass Supreme resto-mod project.

LQ4, MP112 Magnacharger Champ pan, Comp custom cam, GM LS6 valve springs, Comp pushrods, Katech oil pump, Rollmaster timing chain, S&P ceramic coated mid length headers.

4L80E, Fuddle 2700 stall 2.0 STR, Trans-go HD2 shift kit.

8.5" 10-bolt, Eaton posi, 3.73 R&P, T/A girdle, stock axles for now

Suspension: Eibach springs, ST sway bars, UMI rear arms, Moog hard parts, Energy bushings, Jeep Grand Cherokee steering box, 13"/12" disc brakes, 17" black Torq-Thrust M wheels, BFG G-Force Sport rubber.

Thats it for now.

 

I'm working on:
1962 chevy stepside truck
2001 LS1/4l60e
4 wheel disc brakes
Air ride and 20" torq thrusts...

Also a buddy of mine and I are working on:
(he owns them I just work on them for free )
1972 k5 blazer
5.3/700r4
air ride
4 wheel disc brakes
&
1968 c-10
2000 LS1 w/a hot cam/4l60e
custom tune
speed&performance pullies & accesories
4 wheel disc brakes

 

here it is

 

87 mazda rx7 t2 chassis
ls1 m6
4.10 gears
stock for now .oh yes its fuuuuuuuuuuuuuuuuuuuuuuuuun

plans are for ls6 heads,cam ,intake or something along those lines

i have pics but they are too big.i will repost with smaller ones