Well maybe i will fit in here after all. Currently i am planning on swaping a LS 6.0 into my 1994 ford F150 extended cab 4x4. Not really getting any good responses from the ford community but thats the brakes of doing something different. Anyways my plan is back the 6.0 with a 4l80e tranny. so far i am in the buying stage untill april when i plann on starting the swap.

 

1999 BMW Z3 M Coupe

LS1 with aftermarket heads, cam, intake and exhaust.

The rest of the car is sorted with brakes, suspension and chassis mods to handle the new power.

 

Just finished up this LS1 conversion in a 74 Datsun 260 Z at the shop.
04 GTO LS1 , 6sp , 3.90 lsd. CV conversion rear axle shafts, 13" discs all around, coil overs, custom suspension arms, A/C . And a couple of body mods for good measure.

Click on Picasa link for more photos.

 

72 Vega
5.3
4l60
8"rear

 

88 lx fox body
01 camaro ss ls1/t56 going to run a 150 shot
build 8.8 rear, full coilovers, control arms, anti roll bar

eventually doing full forget rotating assembly, custom heads cam and hopefully some sort of forced induction

 

I have been working on this for over 2 yrs now. And may have already posted. Im not shure how to post stuff in here very good. Will see if this works.

 

2008 gmc single cab
awd, 6 speed tranny (6l80), 6.2 ,
now just have to change a lifter lol

 

1991 Z28 convertible
heads/cam 6.0 and T56

Link to fully documented swap thread:

http://www.thirdgen.org/techboard/lt...l-lsx-t56.html

Link to my photobucket album for the swap:

http://s37.photobucket.com/albums/e9...28/LQ4%20swap/

 

here is my 61 ss impala with a lq9 block and heads ls6 intake turnkey acc 200r4 tran 373 pos rear end

 

67 camaro convertable 2001 ls6 4l60e, have all parts just starting 1st assembly, I'm sure I'll have many questions for anyone willing to answer. thanks in advance.

 

71 chevy c10 lq4 mated to 400, stock rear and suspension( for now) hoping to change trans soon,also just sold numbers matching big block to start swap. need headers, any one have part #s for what they ran? I have seen them, but everywhere I look, (summit, jegs, ect) they have no clue what I can use. can I use camaro, vette, truck headers? please reply if u can help.

 

1973 AMC Gremlin X
LS1, 4L60E
Pic's coming soon

 

1989 Nissan 240sx
Getting a 5.3l out of a 04-05 wrecked pickup
mixed and matched parts and everything is low budget atm
Linky-https://ls1tech.com/forums/conversio...ter-build.html

 

91 Nissan 240sx hatch back
LS1 block
LS6 ported / polished heads
Titanium retainers
Crane Valves
Crane Valve springs
Comp Cam custom grind cam
Built tranny
34lb injectors
Ported/Polished throttle body
Ported LS2 oil pump
Custom Headers
Tuned on a Dynocom made 423whp and 428 tq.

 

LY6 with vvt/ 4l80e combo going into 68 chevelle. Just sold the big block and am gettting parts together to start project next week. Wish me luck!

 

Vehicle: 1985 El Camino SS
Engine: 2005 5.3 w/2004 GTO LS1, intake, coil pack,fuel rails, water pump,
alternator, ps, ac, serpentine belt drive, exhaust manifolds, 02's and
cats.
Trans: 4L60e

 

It's gettin closer!!

04' GT, 408 (6.0L)
Glide, 101mm, D/R car.

Just a mock up block in right now, mines got some ET Performance CNC'd AFR 225's, Super Victor, C&S carb, AMS 1000.........

Here is the progress so far, the hot side is all done as well, just no pics yet. http://jakesperformancefabrication.c...lery/v/Kinger/

 

1968 firebird convertible
99 ls1, m6
air ride suspension

 

Did have a '87 Mazda RX7 with a LS1...

Now have a '92 BMW 325i 4-door getting the transplant

 

1984 mustang svo
ls1 4l60e
single 80mm turbo
aje k member
custom wiring harness