nice stuff in here

 

My conversion is a 1968 Camaro Z-28 with an LS2 in it. We just finished the conversion over this past winter. It is a very fun daily driver. There are a couple pics in my garage here with more info. on the car.

 

#1:
1976 AMC Pacer
LQ4 w/ L92 heads and LS3 intake, 4L80E

#2
1999 Silverado C1500
2007 L92 w/ 6L80E

 

1) 1966 Chevy C10 Shortbed Stepside
2) Big cammed Lq4, built 4l80e
3) Full build pick heavy here
http://67-72chevytrucks.com/vboard/s...d.php?t=397618

 

http://www.youtube.com/watch?v=6UNDSKCguqc

 

My 82 cutlass just got a 6.0 lq4 for now it will stay stock with a Texas speed and performance 233/239 cam. With a powerglide 3800-4000 stall and a 3.73 geared posi still need to get a wire harness and ecm.

 

71 chevelle ss
Ls1 Engine, 243 heads, trex cam, powerplus intake
T56 Tranny with LS7 Clutch
12bolt rear end 4:56 gears, eaton posi
4 wheel disc brakes

 

thats a bad sum bitch

 

1) 1985 Monte Carlo SS
2) LS2 from Trailblazer SS, with T56 Magnum 6 speed
3) Pro-touring.com build thread: http://www.pro-touring.com/showthrea...getting-an-LS2

Work in progress, not much info there yet.

 

the cleanest original low milage 91' mustang coupe
ls1 t56
stock piling parts
soon to be boosted
http://www.californiafords.com/cgi-b...album=00010017

 

1.) 91 Miata
2.) LS6 from an 01 Z06/T56 out of a WS6/Getrag from a 05 CTS (3.42 w/LSD)
3.) Work in progress!

 

1. GenI Nova
2. LS1 from '04 Corvette/T56
3. Work in progress
TCI front clip/3 point rear

I would post so pics but I have not figured out how to move them from my computer to this forum.

 

1996 Nissan 240sx S14

1999 vette ls1 motor(auto) harness,computer,(drive by wire)pedal assembly,harness,&module

2002 camaro T-56 transmission(with no harness)

How or what harness or plugs do I need to make this transmission work with the motor/harness from the (auto) 99 vette motor? Thanks

 

1) Vehicle receiving the swap
2009 cadillac CTS-V
2) Your new combo, LS1; A4 or M6, etc.
LSX 434 Bowtie, currently with 6L90E
Build in sig
3) Link to pics if you have any
None at the moment

 

I have a 1969 c-10 and I just got a 5.3 complete with 4l60e trans what do I need to make this work

 

I'm doing a 91 corvette.
This is the Victim

here is a link to the thread

https://ls1tech.com/forums/conversio...e-my-swap.html

This is the Victim.



Here is the engine.

built/forged 5.3 347 iron block with 241 heads
MS3 cam
237/242, .603"/.609", 113 LSA
LS6 Intake

Wiring harness and PCM from a 99 Z28 tuned for the set up.

 

1) 1990 Nissan 240sx hatchback, full suspension rolling chassis
2) 99 LS1/T56.. blueprint/balanced, H/C, 80mm TB, Sikky LTs
3) Money comes, money goes..all into my car!

 

What 99 ls1 motor are you running? F body, vette or GTO?

 

69 camaro ls1 4l60e work in progress

 

99 Trans Am..