s10 ls1ers
Teching In
Joined: Sep 2006
Posts: 25
Likes: 0
From: nh
hey jhankinson,looks cool,sounds sweeeet,nice job,hey guys if anyone is interested in doing a ls1 4x4,turbotime will be soon offering a custom made pan,he makes a sweet oil pan,the quality and craftsmenship in the pan work is top notch,i purchased one but it did not fit right,due to it was made more for the typhoon and syclone,it needed some custom cuttin for clearance issues,he is going to be getting my pan back to finish welding where i need it,and hopefully i will be installing my motor soon [for the last time...i hope]
sorry about the mini novel her guys,
and one more thing how do i post my pictures,yes i finnally got pictuers to post but im not sure how to do it,any help would be great,
sorry about the mini novel her guys,
and one more thing how do i post my pictures,yes i finnally got pictuers to post but im not sure how to do it,any help would be great,
Teching In
Joined: Apr 2007
Posts: 47
Likes: 0
From: Racine, WI
Originally Posted by rollinphat4me
and one more thing how do i post my pictures,yes i finnally got pictuers to post but im not sure how to do it,any help would be great,
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Apprentice
Joined: Aug 2005
Posts: 347
Likes: 0
From: Dover Arkansas
Engine looks great. Your clearance looks tighter than mine was. I just had to ball peen alittle on the manifold at that tower location to get it to clear. Also on the steering side a little ball peening. Looks good though. Like the red Blazers.
Teching In
Joined: Sep 2006
Posts: 25
Likes: 0
From: nh
eagleuh1 thanks,is yours a 4x4,and if so what year,iwant to do my own wiring harness,but im not 100% sure what hurdles i will encounter,my truck is a 96 and due to the year i have run both ecms,the ls1 ecm for the motor and trans,and the 4.3 ecm for the abs brakes,any input here guys would be greatly appreciated,thanks