Stampede4ever

Looking for plug and play. And who does the Colorado harness?

Thanks.

G-Body

iTrader: (4)

check the sponsors list, Speartech does

shanekennedy

iTrader: (1)

i just read in another thread speartech had quit mod'ing harnesses

joelvette

iTrader: (11)

nelson and wait 4 me are both sponsers over on the truck side

Speartech

iTrader: (14)

I'm not sure where you read that but we are still doing the factory harness reworks.

I've had to cut out most of the specific model swap harnesses ("I want to put an LS1 in a xxxxxxx, and I want it to plug into the dash so all of the gauges work normally..."). These took an enormous amount of research to make them work properly and there is no consistancy to them, so each project was like starting over again.

We've gotten real busy lately with the LS7/LS2 harnesses.
We also make the harnesses for the Mallett Solstice/Sky LS2 project.

With all of that stuff in addition to the LS1/LS6 and all of the 4.8, 5.3, 6.0 harnesses, I had to cut out some of the oddball stuff.

But we're still doing the factory reworks as well as new custom harnesses!

shanekennedy

iTrader: (1)

i emailed wait4me & got a reply from hannah bubb (jesse's wife?) saying they no longer mod harnesses

shanekennedy

iTrader: (1)

here is the thread stating you were out of the conversion business
https://ls1tech.com/forums/showthrea...ight=speartech

glad to hear it's not true, i'm going to need some help as soon as i can find a used TAC module & harness

fasthuhpat

Here is what i did, go to alldatadiy on the web, you can subscribe to it and for 25 bucks for a year you can down load wiring diagrams for your car, or the wiring harnes year to make your own stand alone harness, pretty easy to read diagrams and you can save them or print them off. There is a lot of info there not just wiring harneses, complete repair and diagnosis codes etc.

Speartech

iTrader: (14)

Ah yeah; that's one of the "plug and play" models we had to cut out.