My 240sx / S14 LS1 Swap - Progress *56k beware*
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well I finally got my LS1/T-56. It's from a 2000 Camaro SS. I plan to put this into my s14 240sx and keep it a daily driver, so keeping it semi-quiet is my goal. Although I'm sure it'll take some effort.
As for parts, I've accumulated:
* sbc adapter plates and mounts;
* an rb20det x-member from a skyline r32
*gto oil pan to arrive.
As for headers I'm still looking around. Anyone got a set for me
I might've seen someone using covette c5 stainless steel headers, but I need to double check.
As for notching the x-member, I'm going to have it notched before I get the motor in. That way I can save some time for the whole swap. If there's any advice / pointers you guys can give me, or some parts I might be able to use for the swap I'd greatly appreciate it 110%.
Here's some pix of my parts...
Camaro LS1 SS with t-56
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/2.jpg)
Internals looking good...
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4865.jpg)
Rb20det x-member
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4870.jpg)
Mounting stuff...
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4880.jpg)
And finally the car I'm going to put it into...
As for parts, I've accumulated:
* sbc adapter plates and mounts;
* an rb20det x-member from a skyline r32
*gto oil pan to arrive.
As for headers I'm still looking around. Anyone got a set for me
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
As for notching the x-member, I'm going to have it notched before I get the motor in. That way I can save some time for the whole swap. If there's any advice / pointers you guys can give me, or some parts I might be able to use for the swap I'd greatly appreciate it 110%.
Here's some pix of my parts...
Camaro LS1 SS with t-56
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/2.jpg)
Internals looking good...
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4865.jpg)
Rb20det x-member
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4870.jpg)
Mounting stuff...
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4880.jpg)
And finally the car I'm going to put it into...
![](http://i7.photobucket.com/albums/y259/mmdb/JDM%20TyteR240%20-%207-4-2006%20PhotoShoot/IMG_3825.jpg)
Last edited by mmdb; 01-26-2007 at 01:11 AM.
#6
TECH Apprentice
Join Date: Aug 2006
Location: Mobile AL.
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
slo is useing some jba c5 stainless headers moded (they called something along those lines).
also let me know if you have any hood clearance problems. i wanna do the 97-98 front end on mine but it looks like the hood slopes down alittle more then the 95-96. or slopes down sooner. i hope their the same (difference shouldn't be much if any). i want the kouki front.
also let me know if you have any hood clearance problems. i wanna do the 97-98 front end on mine but it looks like the hood slopes down alittle more then the 95-96. or slopes down sooner. i hope their the same (difference shouldn't be much if any). i want the kouki front.
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by fouz65
also let me know if you have any hood clearance problems. i wanna do the 97-98 front end on mine but it looks like the hood slopes down alittle more then the 95-96. or slopes down sooner. i hope their the same (difference shouldn't be much if any). i want the kouki front.
#9
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for the complements guys. I'm going to do a compression test tomorrow to make sure the internals are OK, and maybe order the headers slo is using also. more to come!
Last edited by mmdb; 01-26-2007 at 11:35 PM.
#12
TECH Apprentice
Join Date: Aug 2006
Location: Mobile AL.
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i have the ls6 intake and i had to notch my hood. it was keeping it from closing by about 1/2 inch. oil pan is about 1/2 above the rack. so its not cause the motor is too high. maybe cause my motor is alittle bit more forward.
#15
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Sabre002
very nice I want to do this next after my LS1 RX7. I'm hooked on V8 swaps, I like that S14 is that all just Silvia front end? Where did you get the mounts and the subframe from, along with the front end parts like that?
Josh
Josh
#16
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well your a little ahead of me, but my black kouki is going to be getting a LS1 here right quick. be sure to post up all the goods man. I take it that R32 RB20, and R33 RB25 members are the same? also i am looking int o differances of R33 RB26 members. got a line on one of those too.
I'll be watching this one closely.
my new project car, the old RB25 one blew
time for a new car and a new motor!
I'll be watching this one closely.
my new project car, the old RB25 one blew
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
![](http://i2.photobucket.com/albums/y19/Tenchuuk/2401.jpg)
Last edited by Tenchuu; 01-27-2007 at 11:47 PM.
#17
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Tenchuu
well your a little ahead of me, but my black kouki is going to be getting a LS1 here right quick. be sure to post up all the goods man. I take it that R32 RB20, and R33 RB25 members are the same? also i am looking int o differances of R33 RB26 members. got a line on one of those too.
I'll be watching this one closely.
I'll be watching this one closely.
here for rb25det info and more
Chances are the rb20det x-member is much easier to find so I'd go that route.
rb20det x-member info here
Take a look at post #29 by ls1neezy. He recommends using the rb20det x-member vs the rb25det. Although I can't confirm fitament, I don't think you can go wrong using either since both engine mounting points are moved forward.
#18
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Took some pix of how the rb20det x-member will line up with the ls1 using the sbc adapter plate. It looks like the AC will get in the way. So the only option is to notch the AC bracket to make it fit or totally remove it, even so, I'm not sure if the AC will even fit in the engine bay :X. Can anyone confirm?
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4890.jpg)
An view of how the x-member will sit vs. the sbc mounts on the engine.
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4890.jpg)
An view of how the x-member will sit vs. the sbc mounts on the engine.
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4889.jpg)
Last edited by mmdb; 01-28-2007 at 04:08 AM.
#20
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Notched the subframe today. It's about 9" inches wide and close to 2" (about 1.8") inches inward. The basic idea is have enough gap to let the oil pan fit through.
Next step is to take it to get welded and boxed up. Btw what gauge steel are you guys using? I'm thinking the thicker the better.
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4900.jpg)
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4898.jpg)
Next step is to take it to get welded and boxed up. Btw what gauge steel are you guys using? I'm thinking the thicker the better.
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4900.jpg)
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4898.jpg)
![](http://i7.photobucket.com/albums/y259/mmdb/LS1%20Swap/IMG_4897.jpg)