1SC stripper build
#83
11 Second Club
iTrader: (7)
Join Date: May 2008
Location: Saline,MI
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Keith
My car came with the ground effects from the factory. It is the RPO code: Y3F sport appearance package. It looks like a V6 car, but its a Z/28, i have seen a few SS's on here with the same package.
My car came with the ground effects from the factory. It is the RPO code: Y3F sport appearance package. It looks like a V6 car, but its a Z/28, i have seen a few SS's on here with the same package.
#84
I am done, the waiting game again. Saving for the FLT trans, Level 6. Will be ready to order the trans at the end of September.
Here is the finished product so far.
My next project in the works for a fellow member.
One of Erics, MWC rearends with drag bar.
Here is the finished product so far.
My next project in the works for a fellow member.
One of Erics, MWC rearends with drag bar.
Last edited by Heyfred; 09-18-2010 at 11:23 PM.
#94
TECH Senior Member
iTrader: (28)
how hard it is to adjust the TA, with the adjuster on top, and the stock floor. I know race craft told me they out it on top, cuz most guys have race cars they are low with 28/30 read tires they have to change the floor were the TA is anyway. So they keep the cover removable to adjust it form in the car.
#98
Launching!
iTrader: (13)
Join Date: May 2002
Location: Niles, Michigan
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
check the ground wire just under the dash on drivers side. Actually it may be under the kick panel. It's the ground to the bcm. Mine did the same thing. Forgot to hook that ground up when I removed dash.