Transam1

iTrader: (6)

LS1 stock bottom end
afr 225's 59cc
236/242 .613/.615 111
Ls6 intake
36# injectors
UD pully
3600 stall
drag radials
was not spinning i wonder what it can run? put a fuel pump on because it was loosing pressure at the launch and at the end of first gear. full weight car also about 11.5 compression

studderin

iTrader: (28)

I'm lost?

brandoz28

iTrader: (3)

what does the rest of the timeslip look like??? that mph is good for mid 7's

Transam1

iTrader: (6)

60' was 2.1

I have 3.42 gears and second gear runs out about 100' from the line

green94z

iTrader: (6)

91 mph should get you about a 7.5 with a 1.5/6 60

bjamick

iTrader: (31)

I did almost identical. Except I'm an M6 with 3.73. 2.2 60' and an 8.2 @ 92.x. Since your an auto I would think it would just hook and go. Something is up though with your trap, have you gotten a dyno tune or just mail order?

MYSTIC-1SC

iTrader: (14)

You can probably get mid 7s out of it if you get that 60ft down a bit. Post a slip so we can the full details of the run.

Transam1

iTrader: (6)

60 ft - 2.121
330 ft - 5.375
594 ft- 7.635
1/8th ET - 8.195
1/8 MPH - 91.7

I even had some run that were 8.4 and 8.5 at 89-91 mph. This was all before a fuel pump was put in last week, havent been back to track yet. Like i said it was loosing pressure sitting in the garage revving it.

BlackScreaminMachine

iTrader: (17)

Well, something is not right, thats a high 12 timeslip for a automatic car with tons of mods. Get it on the dyno, make sure its running safe and good fuel PSI and if its doing good there. Time to work on suspension.