When should you screw the rim.
#1
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got a set of centerline convpros, 26/10.5 out back wondering when people start screwing the rims . Gonna be putting them on sometime soon and was gonna get them balanced so any help would be nice.
Thanks
Thanks
#3
LS1Tech Co-Founder
iTrader: (38)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Simply mark the tire with a wax pencil next time you go racing. Put an arrow on the tire pointing at where the inflating valve is located. If that position doesn't match up at the end of the race day, your tires are moving.
I was cutting 1.4 60' times in my Formula, and the tires never moved (28" ET Drags, 10" wide Weld Draglites). It also depends on the tires, the wheels, and how hard the car shocks the rearend.
Tony
I was cutting 1.4 60' times in my Formula, and the tires never moved (28" ET Drags, 10" wide Weld Draglites). It also depends on the tires, the wheels, and how hard the car shocks the rearend.
Tony
#5
TECH Veteran
iTrader: (1)
Join Date: Nov 2001
Location: Houston,TX
Posts: 4,167
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Like nineball said mark them and if they move, screw them. We have convo pros with 26 10.0 et drags and the first time out with the heads and cam they spun at least an inch every pass, even with the 1st easy launch pass. We ran them at 16psi cold. Now they are screwed to the rim.
Trending Topics
#8
10 Second Club
iTrader: (3)
Join Date: Sep 2002
Location: Katy, TX
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No tubes are needed when you screw the rims. I have 9 on each side of the rim. Some go 8 or more/less. Its really up to you. I would go with 8 on each side just so you only have to buy one pack of screws.
#10
TECH Addict
iTrader: (4)
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,485
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I had Discount Tire use bead sealer on my slicks on my 88 Mustang. Ran 1.36 60' with 13 psi and no slippage. Not only does it "glue" the tire to the rim but your tires never leak down.
#12
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my hoosiers QTP slip about 3" per trip to the track! thats on my bogarts.
i was told to scuff the back of the lip a little with sand paper and poor 1/4 can of coce in it and it "WONT" slip.
i'll let you know when i do it how it works.
i was told to scuff the back of the lip a little with sand paper and poor 1/4 can of coce in it and it "WONT" slip.
i'll let you know when i do it how it works.
#13
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Are you making somekind of cocktail in the tires, LOL
Ok im gonna only put a few screws in each wheel, what size screw do u use , Im not buying those already packaged wheel screw, Im hitting the local bolt store over here and they have sheet metal screws in many sizes and grades.
Forget that last statementi did a search and found out #14 by 3/4 should work. Thanks everyone.
Ok im gonna only put a few screws in each wheel, what size screw do u use , Im not buying those already packaged wheel screw, Im hitting the local bolt store over here and they have sheet metal screws in many sizes and grades.
Forget that last statementi did a search and found out #14 by 3/4 should work. Thanks everyone.
Last edited by boomcase; 03-17-2004 at 05:01 PM.
#16
8 Second Club
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you want to be perfect get a protractor, yardstick, marker and a piece of posterboard, cut it the same diameter as the wheel and mark it off every 45 degrees and then draw the lines all the way to the edge if the circle, lay it on the wheel and use that to mark where you want them. I do it a little more low tech, just eyeball 4 of them 90 degrees apart and then put the other 4 in between - sometimes it looks a little off but you dont notice when the wheels are turning
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#19
TECH Fanatic
iTrader: (1)
Join Date: Mar 2002
Location: Bellevue, Nebraska
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just can't bring myself to screw my new Bogarts. I atleast want to see if the tire has any slippage on the rim first. I did screw my Weld Draglites, but they had never presented a problem without them. I will probley order another set of Bogarts for the rear to run Hoosier Drag Slicks on, those will get screwed for sure.