Tim98TA

iTrader: (7)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by SSteveL:
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Terry Burger:
<strong>Chris how much block filler? <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Why? It doesn't have crazy displacement.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I think Terry is wondering that because he had to use it in his block to keep it from leaking. Looks like THIS ONE was done right.

Where the hell is the video for this run?????
DAMN that is awesome fast. Congrats ARE

Tim

SJH

excellent job!
I am very pleased to hear it's an aluminum block handling the n20 power.
It is a sleeved aluminum block right?
Steve

badass 2002 z28

iTrader: (5)

<img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> the first 8 second LS1

CHRISPY

Video should be up on Monday. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Cheers,
Chris

99 Black Bird T/A

iTrader: (4)

Props to ARE on this one!

Props to Wade for making it happen!

<img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />

GeorgeC

Great job, guys! That car really boogies down the track! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

Joe Kizzire

News flash everybody.... Tony started a thread about ARE doing something good . That would not have happened six months ago. Of couse six months ago ARE didn't have the great sleeved block they have now and six months ago Tony didn't have the block problems he has now and can't seem to get them fixed. I can hear the vacume being pulled between Houston and Ontario as I read this thread. Let the suckup job begin!!! LOL

I love it!!!!!

Warbird

Awesome guys, you are tops <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> . No matter who makes it there next and how, they will always be second <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> I wish I could have got out there today. Well done

A few notes:

This is a two year old block and as a matter of fact the very same block that came out of Wade's C5 when he ran 9.25. ARE long ago solved the problem of leaking blocks.

The car is stock suspension and mounting points narrowed rear end and no tub. Shocks are HAL, 9" rear ens and it has a BMR Torque arm

The engine is re-sleeved aluminum 4.100" Bore 4.000" stroke, This is the very same block they produce for their customers and there is nothing special about it.

The block is not filled.
The Block is and LS1
The car weighs between 3200-3400
Yes it is a solid roller

These guys know how to tune NOS

Paul

<small>[ October 05, 2002, 08:58 PM: Message edited by: Warbird ]</small>

onfire

iTrader: (17)

<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

kewlbrz

Phenominal. Cant wait for the video. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />

JP98SS

Geez guys...I was assuming that it was an iron block for nitrous. Why don't you post the specs of the car? This was in no way an assult on ARE. I have an ARE block in my car so lay off.

KECHME

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Warbird:
<strong>This is a two year old block and as a matter of fact the very same block that came out of Wade's C5 when he ran 9.25. ARE long ago solved the problem of leaking blocks.
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Damn good thing, I know I went through about 5 cans of bars leak to get David Douberlys car to seal up, well at least long enough for it to make 20 passes. The mile to buck factor was way out of wack on that one for sure. Good to see a better quality product coming out of there now. BTW what does that beast run on the motor?

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">
These guys know how to tune NOS
</font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">How much tuning does it take to make an extra 225 RWHP? Hell, our stock bottom end, throw together shop car picks up 290 at the wheels and stays together.

<small>[ October 05, 2002, 09:25 PM: Message edited by: KECHME ]</small>

SSteveL

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by JP98SS:
<strong>This was in no way an assult on ARE. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Don't worry; I didn't see it as such.

Warbird

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by JP98SS:
<strong>Geez guys...I was assuming that it was an iron block for nitrous. Why don't you post the specs of the car? This was in no way an assult on ARE. I have an ARE block in my car so lay off.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I also have an ARE motor in my car. I meant no assault towards anybody. I can only tell you what I know.

The motor is a re-sleeved aluminum block 422 LS1, solid roller with 1 stage of direct port Nitrous. It has custom stepped headers, dual exhaust, LS6 intake, LS6 heads, no AC (windows are fine at 150+ <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> ), a stock PCM, fuel cell and bigger injectors The driveline is a 2spd glide, chrome moly shaft, 9" ford rear end narrowed not tubbed, hooked up to a stock suspension, they are also waiting on a TH400 trans for later. ARE also runs their custom chrome moly K-Frame up front.

Beyond that the car wieghs about 3250 and sounds mean as hell when your standing beside it.

I hope that answers most of your questions.

Paul

romanss

iTrader: (3)

Congrats guys.

First in the 8's. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

98TAauto

iTrader: (2)

<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> LS1 IN 8'S <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

its about damn time!!! whats next?? 7's <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />

definitly a break through, im sure many more will be following soone enough. Its good to tell mhy fords friends that we know have a LS1 running 8's <img border="0" alt="[guns]" title="" src="graemlins/gr_guns.gif" />

Congrats ARE and Wade!!

Fenris Ulf

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by JP98SS:
<strong>Um...I don't think that is a resleeved motor. If it is...why don't they recommend over a 150 short on their blocks? 8s are an unblieveable achivement none the less. Hell...I hope it is a resleeved block...I have one in my SS.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">If you owned a shop, would you recomend your customers to spray a 300 shot on a resleaved aluminum block? Hell no, you would quickly develop a reputation for producing motors that cant stand up to the abuse you promised.

RCswish

Whoa <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />

ROBS SS

iTrader: (7)

congrats guys <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

EuG

<img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />

<small>[ October 06, 2002, 01:34 AM: Message edited by: EuG ]</small>