SFI 25.2 Mustang/LSx build "The Renegade"
06-27-2010, 12:01 PM
#3181
Knocked out a bunch of little ****,
- removed all the old wiring, going to rewire the whole car
- made the MSD 8 mount so it hung under the crossbar
- Got the BS3 hung
- Painted the chassis underbars and some of the upper bars
Things left
- still need to mount the Racepak datalogger under the front of the driver seat
- glue in carpet
- finish painting
- Bleed and plumb the brakes
- Clean all the lines and hoses
- basically get ready for final assembly
Got the MSD box mounted
MSD box, Co2 mounted and Intercooler mockup
BS3 mount 20ga sheetmetal
BS3 mount 20ga sheetmetal
Turbo blanket courtesy of PTP turbo blankets Thanks guys!
Turbo blanket
For all you rusty control arm fans
Control arms done
Tranny mount welded and painted
Painting the cage again
Underbars painted, still need to finish the floor.
Driveshaft loop
- removed all the old wiring, going to rewire the whole car
- made the MSD 8 mount so it hung under the crossbar
- Got the BS3 hung
- Painted the chassis underbars and some of the upper bars
Things left
- still need to mount the Racepak datalogger under the front of the driver seat
- glue in carpet
- finish painting
- Bleed and plumb the brakes
- Clean all the lines and hoses
- basically get ready for final assembly
Got the MSD box mounted
MSD box, Co2 mounted and Intercooler mockup
BS3 mount 20ga sheetmetal
BS3 mount 20ga sheetmetal
Turbo blanket courtesy of PTP turbo blankets Thanks guys!
Turbo blanket
For all you rusty control arm fans
Control arms done
Tranny mount welded and painted
Painting the cage again
Underbars painted, still need to finish the floor.
Driveshaft loop
Last edited by Phil99vette; 06-27-2010 at 12:09 PM.
06-27-2010, 12:48 PM
#3185
TECH Resident
iTrader: (6)
Join Date: Nov 2004
Location: northeast Miss.
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
I like that trans crossmember, I think we are going to do that over the winter so we can yank the trans a little easier without having to pull the intercooler.
06-27-2010, 01:12 PM
#3188
Its kinda a pain in the *** getting everything lined up, with the removeable tranny mount and the removable tranny tunnel I can get the tranny out in 10 minutes. Before the tranny bolts took 10 minutes alone but from the top side you can take them off like nascar removes lug nuts.
06-27-2010, 06:05 PM
#3192
Thank you for painting 
Car will look 10000 times better once it's done now 
I know noone cares what a fast car looks like, but I'll tell ya, when I see a really CLEAN fast car, I know that they've taken it just that little bit further with everything... paint's always the last thing anyone does, but when you see that done, you know everything else is 110%
Looking good... if you were closer I'd ozite the car for ya
Car will look 10000 times better once it's done now I know noone cares what a fast car looks like, but I'll tell ya, when I see a really CLEAN fast car, I know that they've taken it just that little bit further with everything... paint's always the last thing anyone does, but when you see that done, you know everything else is 110%
Looking good... if you were closer I'd ozite the car for ya
06-27-2010, 06:33 PM
#3193
Thank you for painting Car will look 10000 times better once it's done now
I know noone cares what a fast car looks like, but I'll tell ya, when I see a really CLEAN fast car, I know that they've taken it just that little bit further with everything... paint's always the last thing anyone does, but when you see that done, you know everything else is 110%
Looking good... if you were closer I'd ozite the car for ya
Car will look 10000 times better once it's done now I know noone cares what a fast car looks like, but I'll tell ya, when I see a really CLEAN fast car, I know that they've taken it just that little bit further with everything... paint's always the last thing anyone does, but when you see that done, you know everything else is 110%
Looking good... if you were closer I'd ozite the car for ya
