My new drag toy. 93 lx coupe carbed LS1/th400. (pics)
#722
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
The Shootout was a roller coaster ride of events for me.
It started off with my fuel guy putting methanol in my fuel can and I could not figure out why it was running all crazy.
Got that handled and my father left two plug wires off and that took a hour to find cause they were slid on but not snapped.
Then the car ran great. I made a motor pass and it went 9.86.
The next day was true street and we did good on the drive. No issues. The first pass was 9.04@150 on the spray(.082 jet) the next was 8.97@150.
On the return road while waiting to make the third pass I was messin with the trans brake the wires to the brake shorted out against a metal plate I had them run under. The car about caught fire from the deal. It was not pretty.
This put me out of the race. And I had a 9.01 avg at that point!
I was pissed. But that's racing.
It started off with my fuel guy putting methanol in my fuel can and I could not figure out why it was running all crazy.
Got that handled and my father left two plug wires off and that took a hour to find cause they were slid on but not snapped.
Then the car ran great. I made a motor pass and it went 9.86.
The next day was true street and we did good on the drive. No issues. The first pass was 9.04@150 on the spray(.082 jet) the next was 8.97@150.
On the return road while waiting to make the third pass I was messin with the trans brake the wires to the brake shorted out against a metal plate I had them run under. The car about caught fire from the deal. It was not pretty.
This put me out of the race. And I had a 9.01 avg at that point!
I was pissed. But that's racing.
#725
9 Second Club
iTrader: (119)
BADASS BRO!! Glad you got it all back together and it will be even tougher next time out!
on a side note, mine sold and new owner went right to the track with it risking the valve float (never got to the track this year before selling it as i never got the time to get the new springs swapped over) and clicked off a 1.25, 5.62 @ 125.71 and 8.75 @ 156 on 20psi and called it a day at that. it's tuned to 22 but i don't doubt he will be looking for aftermarket heads and more boost soon enough! but i'm happy to finally see you get into the 8's! i'm gonna be in the market for another ls/fox but with a turbo or 2 this time around.
keep up the great work man!!
on a side note, mine sold and new owner went right to the track with it risking the valve float (never got to the track this year before selling it as i never got the time to get the new springs swapped over) and clicked off a 1.25, 5.62 @ 125.71 and 8.75 @ 156 on 20psi and called it a day at that. it's tuned to 22 but i don't doubt he will be looking for aftermarket heads and more boost soon enough! but i'm happy to finally see you get into the 8's! i'm gonna be in the market for another ls/fox but with a turbo or 2 this time around.
keep up the great work man!!
#726
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
Right on Scott. I hope you had a good time at the race this year. The weather was awesome this time.
Dave, I can't beleive the car is sold. I seen a post were you were waiting on the buyer to show up for it. 8.75 is no joke. And to think there is more in it. You will miss that car come next summer lol.
Dave, I can't beleive the car is sold. I seen a post were you were waiting on the buyer to show up for it. 8.75 is no joke. And to think there is more in it. You will miss that car come next summer lol.
#728
9 Second Club
iTrader: (119)
Right on Scott. I hope you had a good time at the race this year. The weather was awesome this time.
Dave, I can't beleive the car is sold. I seen a post were you were waiting on the buyer to show up for it. 8.75 is no joke. And to think there is more in it. You will miss that car come next summer lol.
Dave, I can't beleive the car is sold. I seen a post were you were waiting on the buyer to show up for it. 8.75 is no joke. And to think there is more in it. You will miss that car come next summer lol.
Last edited by PRAY HRD; 11-25-2013 at 06:44 PM.
#731
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
Well my car is just sittin pretty in my garage just beggin for me to start on the winter maintenance. My work is slow so I can't afford to buy new parts yet but there is lots of cleaning and servicing I want to do. And the wiring problem on the trans break needs redone.
The upgrades I want to do are Strange front brakes and new Afco double adjustable front struts.
My goals for this year are as close to 8.50 as she will go and 155 mph plus.
The upgrades I want to do are Strange front brakes and new Afco double adjustable front struts.
My goals for this year are as close to 8.50 as she will go and 155 mph plus.
#732
9 Second Club
iTrader: (119)
sounds like we have similar goals again lol except i Still need to go that .07 faster to reach the 8's!
Turbo, yes....2 of them this time to be precise! I don't have the know how to disassemble a block and go through it or i'd give the jy thing a shot. I'm just going to look around for a forged motor if i can find a deal or bite the bullet on having AES build me 1 of their 390's probably. Every now and then i start looking for bigger & badder but i really don't want to drop every coin i have after selling my other car, i could still use a far better dd than my 200k+ mile '97 escort rust bucket lol i shouldn't speak ill of it, it's the primary reason i'm able to afford to build Anything! No payments, chases parts great (wagon) and get's 29-30mpg yet which is needed for my 65 mile round trip commutes to work!
I have aerospace fronts & strange rears for the brakes (sadly they left it 4 lug! smh) and want to do 5 lug for wheel options so i will have the rear brakes drilled out by them for it and will end up selling my aerospace fronts and buying the strange to match. Hoping to have enough to minitub the car for a bigger tire or at least a sweet stance with coil overs as long as the work is being done back there.
I hope to get this chassis recertified this year and hit up a big boy track and maybe get to an LS event nearby, like Indy or 66, wherever it'll be at, Just for the fun of it lol
Afco's would be nice to have!!
Turbo, yes....2 of them this time to be precise! I don't have the know how to disassemble a block and go through it or i'd give the jy thing a shot. I'm just going to look around for a forged motor if i can find a deal or bite the bullet on having AES build me 1 of their 390's probably. Every now and then i start looking for bigger & badder but i really don't want to drop every coin i have after selling my other car, i could still use a far better dd than my 200k+ mile '97 escort rust bucket lol i shouldn't speak ill of it, it's the primary reason i'm able to afford to build Anything! No payments, chases parts great (wagon) and get's 29-30mpg yet which is needed for my 65 mile round trip commutes to work!
I have aerospace fronts & strange rears for the brakes (sadly they left it 4 lug! smh) and want to do 5 lug for wheel options so i will have the rear brakes drilled out by them for it and will end up selling my aerospace fronts and buying the strange to match. Hoping to have enough to minitub the car for a bigger tire or at least a sweet stance with coil overs as long as the work is being done back there.
I hope to get this chassis recertified this year and hit up a big boy track and maybe get to an LS event nearby, like Indy or 66, wherever it'll be at, Just for the fun of it lol
Afco's would be nice to have!!
#733
On The Tree
iTrader: (15)
Join Date: Aug 2006
Location: Louisiana
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Glad to see you were able to fix it.This car for some reason stayed on my mind back when you picked it up and started this thread,kinda inspired me I guess you could say,so after a couple years of trying to loose the bug,i just gave in and built one.
Last edited by streetlegalls1; 12-07-2013 at 01:30 PM.
#734
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
sounds like we have similar goals again lol except i Still need to go that .07 faster to reach the 8's!
Turbo, yes....2 of them this time to be precise! I don't have the know how to disassemble a block and go through it or i'd give the jy thing a shot. I'm just going to look around for a forged motor if i can find a deal or bite the bullet on having AES build me 1 of their 390's probably. Every now and then i start looking for bigger & badder but i really don't want to drop every coin i have after selling my other car, i could still use a far better dd than my 200k+ mile '97 escort rust bucket lol i shouldn't speak ill of it, it's the primary reason i'm able to afford to build Anything! No payments, chases parts great (wagon) and get's 29-30mpg yet which is needed for my 65 mile round trip commutes to work!
I have aerospace fronts & strange rears for the brakes (sadly they left it 4 lug! smh) and want to do 5 lug for wheel options so i will have the rear brakes drilled out by them for it and will end up selling my aerospace fronts and buying the strange to match. Hoping to have enough to minitub the car for a bigger tire or at least a sweet stance with coil overs as long as the work is being done back there.
I hope to get this chassis recertified this year and hit up a big boy track and maybe get to an LS event nearby, like Indy or 66, wherever it'll be at, Just for the fun of it lol
Afco's would be nice to have!!
Turbo, yes....2 of them this time to be precise! I don't have the know how to disassemble a block and go through it or i'd give the jy thing a shot. I'm just going to look around for a forged motor if i can find a deal or bite the bullet on having AES build me 1 of their 390's probably. Every now and then i start looking for bigger & badder but i really don't want to drop every coin i have after selling my other car, i could still use a far better dd than my 200k+ mile '97 escort rust bucket lol i shouldn't speak ill of it, it's the primary reason i'm able to afford to build Anything! No payments, chases parts great (wagon) and get's 29-30mpg yet which is needed for my 65 mile round trip commutes to work!
I have aerospace fronts & strange rears for the brakes (sadly they left it 4 lug! smh) and want to do 5 lug for wheel options so i will have the rear brakes drilled out by them for it and will end up selling my aerospace fronts and buying the strange to match. Hoping to have enough to minitub the car for a bigger tire or at least a sweet stance with coil overs as long as the work is being done back there.
I hope to get this chassis recertified this year and hit up a big boy track and maybe get to an LS event nearby, like Indy or 66, wherever it'll be at, Just for the fun of it lol
Afco's would be nice to have!!
#736
On The Tree
iTrader: (15)
Join Date: Aug 2006
Location: Louisiana
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
347,manley rods,diamond pistons,TEA 5.3 stage 2 heads,MS3,fuel injected,th350,3,800 PI,UPR k and arms and list goes on.Fixing to set up a direct port NX. After the holidays,starting on the 383 build and this car is your car's fault
Last edited by streetlegalls1; 12-07-2013 at 08:14 PM. Reason: pic
#738
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
Why does it have a sfc on drives side but not pass?
It looks like a 10.50 setup at least. Very nice.
#740
On The Tree
iTrader: (15)
Join Date: Aug 2006
Location: Louisiana
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
We had just finished tig welding the exhaust and were starting the Kenney Bell sub frame connector install when I snaped a pic.This was a 4cyl virgin car from Dallas that I snaped up after it went on Craigs list just 20 min.After cleaning off 20 years of texas dirt,this is what was under neath