417 rwhp/425 rwtq N/A LS1 with stock cam!
#41
Not true.... For the STOCK cam. Every time I dynoed my cars, I had more torque then hp.... While I still had the STOCK cam in the car.
My 99 SS M6, LS1, made:
297/308 stock
352/360 lid/longtubes/stock catback
463/499 lid/longtubes/dualcutouts/stock catback/100 shot/12bolt full spool
My 01 Z06 M6, LS6, made:
362/363 stock
Aftermarket cams are a different story....
My 99 SS M6, LS1, made:
297/308 stock
352/360 lid/longtubes/stock catback
463/499 lid/longtubes/dualcutouts/stock catback/100 shot/12bolt full spool
My 01 Z06 M6, LS6, made:
362/363 stock
Aftermarket cams are a different story....
#42
TECH Fanatic
iTrader: (1)
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
i saw this same thread on LS1GTO.COM..
380ftlbs at 3000rpm with the stock cam and cubes?i don't think so..
can anyone show me another car that makes that much TQ at that rpm with the OEM cam and ported heads?or even a small aftermarket cam,ported heads and 346ci?not trying to be a dick,and congrats to the OP if he's telling the truth,but that's hard to believe..
380ftlbs at 3000rpm with the stock cam and cubes?i don't think so..
can anyone show me another car that makes that much TQ at that rpm with the OEM cam and ported heads?or even a small aftermarket cam,ported heads and 346ci?not trying to be a dick,and congrats to the OP if he's telling the truth,but that's hard to believe..
#43
it isnt really a stock cam with the 1.85 rockers...like putting in a cam with more lift and keeping the 1.7s or what he did stock cam with 1.85s still the same...
great numbers though...
great numbers though...
#44
Awesome numbers, I remember you from the Bolt-on LT1 shootout in GM high tech and your stout AI LT1 setup.
I have a question for you, what 1.85 rocker did you go with and how much were they? Also what springs and did you change the pushrod length?
Brother has a magnacharged LS2 that I believe a ported 243 head from AI and some 1.85 rockers would wake it up.
I have a question for you, what 1.85 rocker did you go with and how much were they? Also what springs and did you change the pushrod length?
Brother has a magnacharged LS2 that I believe a ported 243 head from AI and some 1.85 rockers would wake it up.
#46
TECH Fanatic
iTrader: (1)
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
1.85 rockers won't change the VEs,which would have more of an effect on TQ production than just adding a little lift and the small amount dur. from the bigger ratio...not enough to put out that much TQ that soon..
#48
TECH Fanatic
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
He's on the road today but will answer what I know about the car.
the RR are Comp Cams.
Adding RRs will not change the duration of the cam ENOUGH to worry with and the PRs are the ones he used when he put the heads on, dont recall the length.
the RR are Comp Cams.
Adding RRs will not change the duration of the cam ENOUGH to worry with and the PRs are the ones he used when he put the heads on, dont recall the length.
#49
Banned
Thread Starter
Join Date: Nov 2004
Location: Easley, SC
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Awesome numbers, I remember you from the Bolt-on LT1 shootout in GM high tech and your stout AI LT1 setup.
I have a question for you, what 1.85 rocker did you go with and how much were they? Also what springs and did you change the pushrod length?
Brother has a magnacharged LS2 that I believe a ported 243 head from AI and some 1.85 rockers would wake it up.
I have a question for you, what 1.85 rocker did you go with and how much were they? Also what springs and did you change the pushrod length?
Brother has a magnacharged LS2 that I believe a ported 243 head from AI and some 1.85 rockers would wake it up.
The rockers are Comp Cams Pro Mag's, and I'm running a 7.3 pushrod with some PAC springs I got from Herron Performance.
#53
Banned
Thread Starter
Join Date: Nov 2004
Location: Easley, SC
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Man I tried this past weekend to go to Rockingham but they'd canceled, which I didnt know untill I got there. Weather was aweseom too, -1000 DA. Disappointment to say the least.
#54
TECH Enthusiast
Join Date: Apr 2007
Location: Charlotte, NC
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
Go back this Saturday, contact the owner Steve and he will admit you in free. A lot of pissed off people last weekend. I was one of them but luckily I got the call about 45 mins into my trip down there.
#56
Banned
Thread Starter
Join Date: Nov 2004
Location: Easley, SC
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Phone recording said they had no water, lol. I'd like to go back this weekend, but its gonna be like 70 degrees and muggy from all the rain. Securing a truck and trailor from friends mulitple weekends in a row sucks, lol. Carolina is will be running the Sundays after Christmas, I may have to wait untill then.
#59
12 Second Club
Join Date: Jul 2008
Location: Webb City,MO
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
HAHA...this makes me laugh...I had the hardest time selling my CNC'ed 241 heads because people's wishfull thinking about spending 1200 bucks for "name brand" heads instead of my $ 450 CNC'ed 241's. I had seen results but intel now had nobody to back me up. People should honestly understand that it's the quality of work...not the name on the damn things! Can't wait to see my buyer's results with the 235-240-600-609-111.5 LSA cam I also sold him.
Very nice numbers...I am honestly not suprised...just thankfull somebody finally did a follow up on a nice budget build.
Very nice numbers...I am honestly not suprised...just thankfull somebody finally did a follow up on a nice budget build.