477rwhp Lq9 milled 317's and a cam
#1
477rwhp Lq9 milled 317's and a cam
Posted a bit back bout getting my car goin after taking a break for 9yrs due to life, worked the bugs outta the efi , had a bad computer from sitting so long In the heat.. Anyway, details of my experiment:
29k mile 6.0 escalade short block
Super Vic with 4bbl tb
Milled 317's .075 no port work , stock valves
250/250 HYd roller specd by my buddy Bret Bauer..
Coan 5k stall 8" converter
Th400
S60 with 4.56 's
All tuned by me..
All in all I'm satisfied with how it all turned out, ESP for the minimal $$$ I have in the conbo.. The sheets std car made 450sae for the sae guys, this is the first sheet he printed...
29k mile 6.0 escalade short block
Super Vic with 4bbl tb
Milled 317's .075 no port work , stock valves
250/250 HYd roller specd by my buddy Bret Bauer..
Coan 5k stall 8" converter
Th400
S60 with 4.56 's
All tuned by me..
All in all I'm satisfied with how it all turned out, ESP for the minimal $$$ I have in the conbo.. The sheets std car made 450sae for the sae guys, this is the first sheet he printed...
Last edited by IllusionalTA; 04-28-2013 at 11:06 AM.
Trending Topics
#12
Just a update , I jumped in on a rental yesterday.. Never installed any of my rear suspension stuff. So I paid for it.. Either way was a good time.. Car went a best if 10.51@128 with a 1.47.. Rear of car wouldn't hold any more.. And my rims were spinning in my tires.. Made 16 hits, and had a blast..
http://youtu.be/lAvcaCiHukc
http://youtu.be/lAvcaCiHukc
#15
Can you tell me a little more about your combo....?
Standalone?
From what I have seen anything over .075 has PTV clearance issues... Were the pistons Flycut?
What was the weight of the car?
I am currently starting to gather parts to build my own LQ4 or LQ9 and this budget build is just what I am trying to duplicate.... in a 3100lb Mustang of course
Standalone?
From what I have seen anything over .075 has PTV clearance issues... Were the pistons Flycut?
What was the weight of the car?
I am currently starting to gather parts to build my own LQ4 or LQ9 and this budget build is just what I am trying to duplicate.... in a 3100lb Mustang of course
Last edited by LSFOX; 12-09-2012 at 05:23 PM.
#17
Can you tell me a little more about your combo....?
Standalone?
From what I have seen anything over .075 has PTV clearance issues... Were the pistons Flycut?
What was the weight of the car?
I am currently starting to gather parts to build my own LQ4 or LQ9 and this budget build is just what I am trying to duplicate.... in a 3100lb Mustang of course
Standalone?
From what I have seen anything over .075 has PTV clearance issues... Were the pistons Flycut?
What was the weight of the car?
I am currently starting to gather parts to build my own LQ4 or LQ9 and this budget build is just what I am trying to duplicate.... in a 3100lb Mustang of course