MS4 numbers
#1
Launching!
Thread Starter
iTrader: (11)
Join Date: Nov 2004
Location: baton rouge,la
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
MS4 numbers
lets see them.
i was gonna go with a f-14/dart225,but im now looking at the MS4/prc ls6's(maybe 2.5's).what numbers are people running with this cam or cambo.any dyno numbers?will i see better numbers with the f-14/dart225 setup?
i was gonna go with a f-14/dart225,but im now looking at the MS4/prc ls6's(maybe 2.5's).what numbers are people running with this cam or cambo.any dyno numbers?will i see better numbers with the f-14/dart225 setup?
#2
Banned
iTrader: (2)
Join Date: Jul 2006
Location: San Antonio, TX
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Check out GM High Tech. Performance Magazine, they just installed the MS4 and PRC stage 2 heads...they made 129+ h.p. increase...you be the judge! In my opinion they are the best for the $$$.
#5
TECH Addict
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01sscam
MS4 Cam, PRC stage 2.5 heads, bolt-ons,4.10's, (485 rwhp, 421rwtq.)
Do ya have FAST 90/90 setup and is't 111LSA ?!
peace
#6
Man-Crush Warning
Do ya have FAST 90/90 setup and is't 111LSA ?!
peace[/QUOTE]
Yup, I'm currently finishing my rear suspension and will be doing the 9" over the winter season, then comes the spray. TNT F1, i'll probably only run a 100 shot with some good fuel though.
peace[/QUOTE]
Yup, I'm currently finishing my rear suspension and will be doing the 9" over the winter season, then comes the spray. TNT F1, i'll probably only run a 100 shot with some good fuel though.
Trending Topics
#8
FormerVendor
iTrader: (7)
Join Date: Apr 2003
Location: Lubbock
Posts: 1,106
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by weaponZ
thanks for posting.nice numbers.any time slips?
Same situation here in lubbock or else we would have alot of results as well.
#9
Launching!
Thread Starter
iTrader: (11)
Join Date: Nov 2004
Location: baton rouge,la
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Zach@Texas-Speed
He's in albequerque, nm where the altitude is 5800 or something crazy. About the only useful info out of track times there are the difference in before/after. Even those are limited by the drastic changes in DA.
Same situation here in lubbock or else we would have alot of results as well.
Same situation here in lubbock or else we would have alot of results as well.
tell me when you comming and i will meet yall there
#11
Staging Lane
iTrader: (1)
Join Date: Jun 2006
Location: Knoxville Tennessee
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
I had my car dyno tuned at Vengeance today. 02 Z28 M6 cam only with the MS4 on a 111 LSA. It made 404 hp & 371 ft.lbs. The dyno graph showed over 350 ft.lbs. from just below 3500 to over 6000 rpm. I LOVE THIS CAM. It sounds wicked and makes killer power. Thanks Texas speed. Next mods will be a cut out & a pulley.
#12
TECH Addict
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02NITROUSLS1
I had my car dyno tuned at Vengeance today. 02 Z28 M6 cam only with the MS4 on a 111 LSA. It made 404 hp & 371 ft.lbs. The dyno graph showed over 350 ft.lbs. from just below 3500 to over 6000 rpm. I LOVE THIS CAM. It sounds wicked and makes killer power. Thanks Texas speed. Next mods will be a cut out & a pulley.
peace
#13
TECH Addict
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02NITROUSLS1
I had my car dyno tuned at Vengeance today. 02 Z28 M6 cam only with the MS4 on a 111 LSA. It made 404 hp & 371 ft.lbs. The dyno graph showed over 350 ft.lbs. from just below 3500 to over 6000 rpm. I LOVE THIS CAM. It sounds wicked and makes killer power. Thanks Texas speed. Next mods will be a cut out & a pulley.
peace
#17
TECH Resident
iTrader: (-1)
Originally Posted by 02NITROUSLS1
I had my car dyno tuned at Vengeance today. 02 Z28 M6 cam only with the MS4 on a 111 LSA. It made 404 hp & 371 ft.lbs. The dyno graph showed over 350 ft.lbs. from just below 3500 to over 6000 rpm. I LOVE THIS CAM. It sounds wicked and makes killer power. Thanks Texas speed. Next mods will be a cut out & a pulley.
#18
Staging Lane
iTrader: (1)
Join Date: Jun 2006
Location: Knoxville Tennessee
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1BAD02WS6
do you have a ported TB? nuymbers seem a bit on the low side to me for such a large cam.
#19
Launching!
Join Date: May 2006
Location: Sugar Hill, GA
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02NITROUSLS1
I really don't care if the number seem low to you or not. People wanted dyno numbers so I posted them. My car is a cam only car with pacesetter LT's, ORY, a shitty flowmaster muffler & the free mods, that's it. I'm sure if I had a cutout, pulley, 85mm MAF, FAST intake & TB I could surpass your cam only numbers of 408. If my car could only be as good as yours!
#20
Launching!
Join Date: May 2006
Location: Sugar Hill, GA
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1BAD02WS6
do you have a ported TB? nuymbers seem a bit on the low side to me for such a large cam.