408/AFR/T-rex on engine dyno
#1
408/AFR/T-rex on engine dyno
I was pretty amazed at the power this motor made. Hans Feustal did the machine work, assembly and I used BS3 to tune it. It made 633/578 torque. I told Hans we would be lucky to get 600 out of it..lol.
Good numbers from two tried and true parts...AFR's and the T-rex cam.
Other mods to the motor are:
stock FAST intake
NW 90
Kooks 1 3/4" headers
compression was 11:1
pump gas
Good numbers from two tried and true parts...AFR's and the T-rex cam.
Other mods to the motor are:
stock FAST intake
NW 90
Kooks 1 3/4" headers
compression was 11:1
pump gas
Trending Topics
#17
Originally Posted by V6 Bird
Post the sheet man. What were the BSFC numbers when he put it up on the brake?
Not my motor, so I didn't grab any sheets. I don't know a damn thing about engine dynos, but I think that it was around .4....sound right? I just paid attention to the WB to make sure it was ok during a pull.
#18
LS1 Tech Administrator
iTrader: (14)
Originally Posted by Kraest
Should be around 530rwhp/491rwtq through the 6-speed.
Not bad at all.
Don't underestimate the LSx platform
Not bad at all.
Don't underestimate the LSx platform
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#20
TECH Resident
iTrader: (6)
Join Date: Jul 2004
Location: West Palm Beach fl usa
Posts: 934
Received 0 Likes
on
0 Posts
Originally Posted by Patrick G
I think that's a little conservative. My experience has shown a 60-65 hp loss when going from the engine dyno to chassis dyno in an F-body with a stick shift. I think the number is going to be higher than 530s.
The loss through my OEM Stock drivetrain to the tires was 64hp...
Christian