1FST99Z

iTrader: (9)

408ci with comp blower cam, AFR 225's untouched, ported fast 90 and nick williams tb to match. all of this on a conservative tune. woohoo.
505rwhp and 495ftlbs tq
I will post a graph when I get it.

what do you guys think.
thanks
Wesley

Websy21

iTrader: (34)

I'd say thats pretty good, what cr do you have?

30th t/a

iTrader: (51)

what compression? what exhaust are you running? any idea what the specs of the cam are?

venom ws7

iTrader: (13)

Nice numbers but same questions as above.

1FST99Z

iTrader: (9)

compression is right at 10.1:1 i did this because I am doing a roots style supercharger and only want 8-10psi. so there was no need for a CR lower than that.

I will have the numbers tomorrow. I think they are like 242/248, ? on lift, and 114 +4

1FST99Z

iTrader: (9)

I am running hooker super comp headers, 3inch x pipe to spiral flow mufflers.

30th t/a

iTrader: (51)

wow those are some good numbers with only 10:1 compression. congrats!

1FST99Z

iTrader: (9)

yeah I was shocked about the Torque. but that is with a very very very conservative tune. not much timing at all. probably could have worked another 20 or so rwhp and tq. but I want longevity.

VINCE

iTrader: (1)

Thats pretty good!!

venom ws7

iTrader: (13)

WOW Thats make the numbers even more great I'v seen some pepole dont get these numbers with alot more compresstion Enjoy the car you should be very happy.

BTW The car will fly with 10psi on it THOSE TIRES WILL HATE YOU.

1FST99Z

iTrader: (9)

yeah I have a brand new set sitting in my spare bedroom waiting to be put on. they will be installed tomorrow. it made over 400tq @2700 RPM's and it made over 450tq from 3400 on up. it started to smoke the tires on the dyno. they had to add more straps. haha.

1FST99Z

iTrader: (9)

o yeah I forgot to mention it was 100 degree's at the time of the runs.

93Phoenix

iTrader: (1)

That's amazing for the compression.

1FST99Z

iTrader: (9)

thanks. I appreciate it.

allngn_c5

iTrader: (3)

Those are great numbers. Just to make sure, those are without the blower correct ?? You will make even more once the blower is installed, holy smokes.

1FST99Z

iTrader: (9)

yeah no blower yet. I think a 12 bolt or 9 inch rear end is next.

1FST99Z

iTrader: (9)

can anyone help me shrink the dyno sheet. I scanned it and it is 11.4mb's.

Rider69

iTrader: (1)

1FST99Z, your PM box is full. I tried to PM you with some questions about this build...

allngn_c5

iTrader: (3)

What do you expect to make with the blower ??

Any thoughts on adding a small shot of Nitrous as well ??

1FST99Z

iTrader: (9)

I cleaned my pm box. not sure what I expect to make with the blower. and I don't think I am going with nitrous. I am still trying to get used to the power at hand now.