Dyno Guesses & Bench Racing Forum Horsepower Estimates | Racing Scenarios

what will it run? estimated hp?

Thread Tools
 
Search this Thread
 
Old 07-19-2012 | 08:18 PM
  #1  
willy9's Avatar
Thread Starter
Launching!
 
Joined: Sep 2011
Posts: 289
Likes: 0
From: Texas
Default what will it run? estimated hp?

Ok guys, I have a 2002 ws6, 6 speed with, torquer v2 cam, longtubes, offroad y, spintech exhaust, plugs and wires, and a lid also running dragradials. My queation is what do you guys think it will run in the 1/4 with optimum conditions? And estimate hp?
Thanks
Old 07-19-2012 | 08:29 PM
  #2  
MyFirstLS1's Avatar
TECH Apprentice

iTrader: (8)
 
Joined: Apr 2009
Posts: 365
Likes: 0
From: Orange county, ny
Default

heads?
Old 07-19-2012 | 09:05 PM
  #3  
willy9's Avatar
Thread Starter
Launching!
 
Joined: Sep 2011
Posts: 289
Likes: 0
From: Texas
Default

241s with double 650 springs
Old 07-19-2012 | 10:09 PM
  #4  
MyFirstLS1's Avatar
TECH Apprentice

iTrader: (8)
 
Joined: Apr 2009
Posts: 365
Likes: 0
From: Orange county, ny
Default

400+ and high 11s with best conditions including shifts and 60' without shattering your ring gear with a good set of tires
Old 07-19-2012 | 10:19 PM
  #5  
willy9's Avatar
Thread Starter
Launching!
 
Joined: Sep 2011
Posts: 289
Likes: 0
From: Texas
Default

You think I can break into 11s? Sweet
Old 07-19-2012 | 10:29 PM
  #6  
ovaboost's Avatar
On The Tree
iTrader: (4)
 
Joined: Nov 2008
Posts: 156
Likes: 1
From: IOWA
Default

mid high 12's seen it many times unless you can rip that shifter low 12s

Last edited by ovaboost; 07-19-2012 at 10:44 PM.
Old 07-19-2012 | 10:44 PM
  #7  
willy9's Avatar
Thread Starter
Launching!
 
Joined: Sep 2011
Posts: 289
Likes: 0
From: Texas
Default

Aww, I guess I need a good set of heads and a FAST to break into 11

Trending Topics

Old 07-19-2012 | 10:47 PM
  #8  
ovaboost's Avatar
On The Tree
iTrader: (4)
 
Joined: Nov 2008
Posts: 156
Likes: 1
From: IOWA
Default

Originally Posted by willy9
Aww, I guess I need a good set of heads and a FAST to break into 11
ls6 or fast will work so a good set of heads would get you into 11s with some good tuning and gearing
Old 07-19-2012 | 10:54 PM
  #9  
willy9's Avatar
Thread Starter
Launching!
 
Joined: Sep 2011
Posts: 289
Likes: 0
From: Texas
Default

Well I already have the ls6, what do you think of the stage one 243s?
Old 07-26-2012 | 09:11 PM
  #10  
streetknight2's Avatar
9 Second Club
iTrader: (10)
 
Joined: Jul 2009
Posts: 1,087
Likes: 1
Default

Originally Posted by willy9
Well I already have the ls6, what do you think of the stage one 243s?
My car has those heads with a Torquer V3 cam and similar bolt ons to yours but I have a auto with stall and 9". Mine made 395HP/364TQ with the converter unlocked so a stick car with a 10 bolt ought to make 410-420 I would guess.

I have no 1/4 mile tracks close but my car only 60' foots mid 1.70's cause of a tight converter and runs 7.70's @ 93-94 in the 1/8

Good luck
Old 08-06-2012 | 08:46 AM
  #11  
mkvamso's Avatar
8 Second Club
iTrader: (2)
 
Joined: May 2010
Posts: 735
Likes: 1
Default

id spend some money on some suspension and a rear end. as it sits it could do low 12s or high elevens but i dont see it gettin there without a 10 bolt killing 60' and powershifting



Quick Reply: what will it run? estimated hp?



All times are GMT -5. The time now is 11:46 PM.