5.3 horsepower list, N/A
#8
Staging Lane
Join Date: May 2011
Location: Finleyville
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Tqr v2 cam only and springs on a cheap rebuild. 308whp on a mustang dyn. Stock ls1 intake and tb. Automatic with the converter locked. I know it's not big
Power but bought the motor for 120$ and after the rebuild had 600 total in the whole motor.
Power but bought the motor for 120$ and after the rebuild had 600 total in the whole motor.
Last edited by Z28Drifter348; 09-23-2012 at 08:32 PM.
#10
On The Tree
Join Date: Apr 2005
Location: Jackson, MS
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ill post mine up Saturday. Going to eps to tune my 2000 Sonoma with 5.3/t56 worked 243s, ls6, vette under drive pulley, ported tb, 85mm maf, 218-226 .595 .598 112, long tube headers, 3" exhaust, and magnaflow muffler.
#15
Staging Lane
Join Date: May 2011
Location: Finleyville
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No stock 862s. With a MLS gasket. In hindsight I should have milled the heads .020 and used a thin gasket and had some port work done but I blew my H/C/I ls1 up last year and I was on the mindset of just throwing a Cammed truck motor in the car do I can use it as a backup dd if my truck takes a ****. And I'll eventually build a hammer for it. With some forged Rods/pistons. Learned my lesson on stock parts
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)