does anyone on here really good at these 9 inch center sections?? i have a midwest chassie fab 9inch, spool, richmond gears, alum strange center. i cant deal with the spool anymore so i am going to buy a wavetrac and some new yukon gears.

i will be pulling center section out soon. is there anyone on here really good at setting these rears up for nice quick setup lol

thanks alot aj

 

AJ a 9in is MUCH easier to set up that any GM rear. I just did mine a month ago

 

EASY THERE it's only 7:30am sunshine!!

 

lmao!!!

 

well how ever i do it i want it to be perfect no god damn rear end noise.

 

I make no guaranties there. But they are easier so getting back lash and your pattern right are MUCH easier.

 

I too can set them up...why are you changing gears? If you reuse the gears, you don't change pinion depth so its a matter of measuring backlash and making sure you get the same backlash with the new carrier.

Like Dan, I don't guarantee it'll be mouse quiet, but I have the tools to measure these things...

 

because the richmond gears are so loud i can hear them over the windows being down, the loud *** exhaust, my wife bitch at me, and the radio full blast lmao

 

is that still the setup that came from MWC??

i got lucky i guess b/c mine hardly makes any noise at all....i get a very slight whine at about 40mph but nothing extreme...just a hint of noise to let anyone in the car know it aint a stock rear..lol.

 

Bang!!!!

 

yea same setup! and it bang bang bangs all around from all the slop in the gear set and gears where set 3 times **** richmonds!

 

Who set them up 3 times? yuh dummy!

 

Yes 9 inches are very easy to set up. I cant believe you dont like the spool... You will notice a big diff at the track taking that out.

 

like? lol

 

probally only be a 12.xx car after you take that spool out.

 

lmao sold i am ordering one today lol

 

there is a nice TH400 forsale, i'll PM the guy your name & tell him your intrested.

 

th400 fuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuck no!! shift shift shift th400 are for race cars and dirt ***** like zitman08

 

Richmonds are all we ever run, never had any noise problems,let alone **** goin bang , i have em in both camaros , one is a 12 bolt gm , the other is a 9 in ford fab 9 with a spool,i havnt ran that one yet . the nova runa a richmond 4.10 gear in a 8.5 gm 10 bolt rear and a spool , same guy set em all up. the nova cuts lo 1.3 60 fts in at 3300 lbs , so its getting hit pretty good on the launch

 

yea the gears make a ton of noise on accel and deccel, i can talk on my phone in the car cause everyone just hears the damn gear noise