Hampton Roads People. Over Here!
#1081
Staging Lane
Join Date: Oct 2005
Location: Norfolk, Va
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
so the condenser didnt even take 5 minutes, so i took the tim to zip tie the under dash harness up as neat as possible.
now i need to either buy or make a firewall panel for the massive hole from the ac, tear the doors apart, pull the sway bar, throw the bottle and dr's on it. and run the **** out of it at the track rental!!!!
just a simple baseline et! lol
now i need to either buy or make a firewall panel for the massive hole from the ac, tear the doors apart, pull the sway bar, throw the bottle and dr's on it. and run the **** out of it at the track rental!!!!
just a simple baseline et! lol
#1084
TECH Senior Member
iTrader: (21)
so the condenser didnt even take 5 minutes, so i took the tim to zip tie the under dash harness up as neat as possible.
now i need to either buy or make a firewall panel for the massive hole from the ac, tear the doors apart, pull the sway bar, throw the bottle and dr's on it. and run the **** out of it at the track rental!!!!
just a simple baseline et! lol
now i need to either buy or make a firewall panel for the massive hole from the ac, tear the doors apart, pull the sway bar, throw the bottle and dr's on it. and run the **** out of it at the track rental!!!!
just a simple baseline et! lol
I have a panel at Va speed you can trace over and copy for that hole. Its just sitting in my car.... saw it today while i was there working behind the dash on mine..........
#1085
11 Second Club
iTrader: (43)
I got my **** fixed. Now I am in need of a tune from someone. Once it warms up it wants to die. Also once it goes to about 5200 rpm the converter seems to slip. I also think I need to run my exhaust out the back under or over the axle. Anyone got any ideas on prices?
#1086
Staging Lane
Join Date: Oct 2005
Location: Norfolk, Va
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
#1087
Custm2500's #1 Fan
iTrader: (15)
Join Date: Nov 2005
Location: SETx
Posts: 13,326
Likes: 0
Received 0 Likes
on
0 Posts
after breaking ANOTHER U joint in less than 3 weeks, last night, I have pretty much narrowed it down to the pinion yoke being stretched. I have another stocker off a broke rearend I'm going to throw on it to see if thats the case. if it is, I'll probably go ahead and upgrade it to a 1350 series yoke and U joint.... all I know is replacing these things is getting old.
The needle bearings still had grease in them this time and looked like steel glitter rather than powder like last time.... Good thing I was at Chauncey's house when I found the problem. jacked it up, pulled the shaft and used his press, it took about 20 minutes to swap the joint and put it back together... pretty soon I'll have this repair down in record time like trans swaps... I can have mine out in 45min and another trans in and running in about 2 1/2 hours... its sad but true.
The needle bearings still had grease in them this time and looked like steel glitter rather than powder like last time.... Good thing I was at Chauncey's house when I found the problem. jacked it up, pulled the shaft and used his press, it took about 20 minutes to swap the joint and put it back together... pretty soon I'll have this repair down in record time like trans swaps... I can have mine out in 45min and another trans in and running in about 2 1/2 hours... its sad but true.
#1088
TECH Junkie
iTrader: (21)
Join Date: Aug 2004
Location: Virginia Beach, VA
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
i was just wondering. I have a Sony cam and i have vids on there from deployment and some other ones from when i first took my car to BPS after the heads that ive been meaning to take off the discs
#1096
Custm2500's #1 Fan
iTrader: (15)
Join Date: Nov 2005
Location: SETx
Posts: 13,326
Likes: 0
Received 0 Likes
on
0 Posts
if this doesnt fix it then I'll definitely be needing one of those. especially once this thing starts seeing some traction and some solid 1.7X 60's if its breaking **** running 2.0's on street rubber I can only imagine what hell's going to break loose once it holds....
#1099
If I ever bought a C4 this is what I would want it to look like...LOL!
http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us
http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us