project tin can shootin for 9's
#463
No really recent updates, just got my 15x10s on the back with a 28x10.5 et drag. With the narrowed rear they sit perfect in the wheel well. I'm gonna hopefully roll it out this weekend n clean it up n take some quality pics. I close on my house next week so money will be slim so updates will be few n far between.
#464
No really recent updates, just got my 15x10s on the back with a 28x10.5 et drag. With the narrowed rear they sit perfect in the wheel well. I'm gonna hopefully roll it out this weekend n clean it up n take some quality pics. I close on my house next week so money will be slim so updates will be few n far between.
#466
haha thanks Rob!
#467
a little udate here.....
Havent got around to do much on it while in my house buying move. So i got all my loose ends tied up with the car after getting the rear narrowed and buying new rear rims 15x10's and got the car back to a roller and all my parts on it. All i have left if fuel system and wiring. So in the meantime iv been keeping it clean etc. However now im back on my feet after buying my house so im gonna strt back on it. Gotta buy a regulator and fuel line next and tat will be all done then a harness and it should be time to fire up! Heres the most recent pics of it all cleaned up and done....
Havent got around to do much on it while in my house buying move. So i got all my loose ends tied up with the car after getting the rear narrowed and buying new rear rims 15x10's and got the car back to a roller and all my parts on it. All i have left if fuel system and wiring. So in the meantime iv been keeping it clean etc. However now im back on my feet after buying my house so im gonna strt back on it. Gotta buy a regulator and fuel line next and tat will be all done then a harness and it should be time to fire up! Heres the most recent pics of it all cleaned up and done....
#469
Looks great man! Should be a beast when it's finished up.
Reminds me a lot of my own car; black LT1 car w/ LS engine, 28x10.5's out back with narrowed rearend, 10pt cage lol....
Mike
Reminds me a lot of my own car; black LT1 car w/ LS engine, 28x10.5's out back with narrowed rearend, 10pt cage lol....
Mike
#475
The fronts are 27s, I had 26s on it but they didn't fill the wheel well gap that I wanted too and the car sat too low with the 26s. So now I got my gap filled and th car isn't scraping the ground
Rob, I don't think there's too much money to be made, especially at a RSD or SCC. There all gonna think it runs 7s lol.
The rear is narrowed 2.5/side
Everyone else thanks for the compliments!
Rob, I don't think there's too much money to be made, especially at a RSD or SCC. There all gonna think it runs 7s lol.
The rear is narrowed 2.5/side
Everyone else thanks for the compliments!
#476
Mike
#480
Looking great! I cant remember if I said it or not, I like how you cut the middle of the grill out. I may do that on mine but i dont think it will look that sexy without an intercooler there.
Last edited by Black94Z28; 07-15-2010 at 08:09 PM.