What cam are you guys running and what HP/TQ and ET's are you getting?
12-29-2003, 06:32 AM
#1
What cam are you guys running and what HP/TQ and ET's are you getting? I am looking at getting a blower (vortech) and wanted to know what cams you guys are running and what HP/TQ and ET's you are getting out of them and at what boost levels. Thanks in advance.
Jeff
Jeff
12-29-2003, 11:33 AM
#2
TECH Enthusiast
Join Date: Dec 2001
Location: Columbia, MD
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
I am looking at getting a blower (vortech) and wanted to know what cams you guys are running and what HP/TQ and ET's you are getting out of them and at what boost levels. Thanks in advance.
Jeff
Jeff
522RWHP/480RWTQ 10PSI
Transmission is preventing us from running low ET's (it will not shift), but it has been a best of 11.37 @ 124.8 on the old M6
New TH-400 with 3200 stall and transbrake going in over the winter.
12-30-2003, 06:24 PM
#7
Teching In
Join Date: Nov 2003
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
I Have An Lt1 Car,but I Will Share My Info Any Way,w/6oo B Procharger, At #9 On The Dyno It Pulled 532rwhp And 490 Rwtq,,my Times Suck Because Of The Stock Rear End,but I Had 2.40 60ft. 8.01 1/8 96mph,,1/4 12.22 121mph,but Maybe I Will Do Better In Another Month,i Ordered A Moser 12 Bolt This Week,so We Will See,i Have A Custom Grind From Comp Which Is 230/236 @50 And 598/608 On A 114 Ls,but Any Way Good Luck,the Tire Spinner
