Large FMIC ??
#7
I dont understand how when fb intercooler is 160? Im not tryin to pump them but I used this intercooler on several set ups and not one issue.
Trending Topics
#9
That intercooler looks almost identical to the ones on ebay. Probably is. And ebay probably sells them slightly cheaper, so thats how he got it cheaper than 160.
#12
I dont know if the IC is made in china or not but before people start bashing me for buying one, The made in the usa **** could be sold for the same amount or slightly higher but everyone in the damn US is so damn greedy
#13
800 starting to push it. i wouldnt mind 500-600 especially if i will notice a big increase in performance, ie lower air temps and less boost lost.
How much can be gained by a good efficient inrecooler w/ 3.5'' tubing vs. a cheaper ebay style one with 3'' tubing?? Setup is in my sig
How much can be gained by a good efficient inrecooler w/ 3.5'' tubing vs. a cheaper ebay style one with 3'' tubing?? Setup is in my sig
#16
I was just looking to run an efficient intercooler for a 396 LT1 w/ AFR 227 heads fully ported w/ solid roller cam, single plane intake, with a F1A maxxed out, hoping for ~20-22 lb boost. House of boost told me I should run at least 3.5'' tubing, I'm not opposed to running 4'' but i dont know how much more of a pain it'll be to route through the car
#18
#20
It def is a nice piece.... how much is there to be gained using 3.5'' or 4'' pipe and this intercooler over lets say one of the ebay intercoolers with 3'' piping???
Talking a max effort F1A setup
Talking a max effort F1A setup