AZZKIKR

iTrader: (2)

All:

I have tried to search for this and have spoken to a few folks and can't seem to get a consistent answer. Does anyone know if this IW 8" pulley will work with a procharger setup on an LS1 / LS6? Or do I have to go with an ATI super damper? I want to get some more belt wrap on my system and a couple more PSI, so I would like to step up to an 8" pulley. I will be using it on my 383 build.

Thanks!

LS1x2

iTrader: (11)

TONS of people use them on c5/c6's.

AZZKIKR

iTrader: (2)

yes, I've seen that. I had just been told for some reason that it won't work with the procharger setup, which I don't understand why it wouldn't.

Twitch1

ECS has the Vette and Procharger listed in their drop-down menu for the 8" pulley. I'd call and ask.

http://www.eastcoastsupercharging.co..._balancer.html

Bob@BruteSpeed

iTrader: (16)

I've used them in the past on Corvettes with ProChargers without any problems at all. Here is one Corvette we had one on. http://www.procharger.com/supercharger/blog/?p=178 Bob

9secVette

They would know, they were the ones to get Innovate to make them.

AZZKIKR

iTrader: (2)

Thanks for the information, Guys. That clears things up.

Brigger18

iTrader: (20)

Can this be used on the 98-02 f body? I didn't see a listing for it thats why I asked?

Blown06

iTrader: (32)

I know they make one for the trucks, so seems like they would make one for the f-body as well. I like mine. Actually measured out at 8.13" using circumference around the top of the ribs to calculate the diameter. Just an FYI

jomomma

iTrader: (39)

i know they work on vettes because the pulleys are in line with the procharger. an fbody uses an additional pulley bolted to the crank pulley. id just call iw.

Bob@BruteSpeed

iTrader: (16)

Correct, the Innovators West balancer wouldn't help at all on an F Body because the blower pulley is bolted on to the outside of the balancer. What he needs to do is to find a machine shop that will make him a larger pulley. Bob

Inspector12

iTrader: (29)

I have talked to IW about a year ago, and theres are made for the covettes only although they said if I sent them my procharger pulley that they would make one any size I wanted for about $300. Just a heads up for you!

Brigger18

iTrader: (20)

Thanks Inspector. I'm gonna try and find a 8 in 8 rib production alum. pulley and have it modified to bolt on. Thats still pretty good price for a new pulley to be made.

1dirtyZ

iTrader: (1)

it will work on a GTO setup but not on an F-body with an SDCE setup ; the belt will hit the water pump pulley if i recall correctly .

Inspector12

iTrader: (29)

Not with an LS2 WP.

charlie_gonzales

iTrader: (12)

So this would work on my 04 Joe gibbs silverado with a magnuson...how much boost would this add...I think its a stock crank pulley with only about 5 pounds...are there any larger crank pulleys out there...

Would the ecs mag tensioner work on my truck i didn't see it listed on there...

I've been thinking about running more boost and adding some ****...

Sorry to butt in on your thread...pm me if necessary...anyone with experience on something similar