what maf sensor do i need?
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Jul 2010
Location: missouri
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
what maf sensor do i need?
im building a ls2 forged internals, d1 procharger and 3.4 pulley. HP should be around 750hp. i heard the stock gto maf is only good for 550 ish... so what maf do i buy? i heard i can use a g8 or ls3, ls7,ls9... or aftermarket? let me know thanks
#6
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Jul 2010
Location: missouri
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Im running the e40 ls2 gto computer/ corvette.. 90mm dbw tb. i think the map and maf sensor are all in one. the weather changes her so often and im just streeting this car ive heard its best to keep it.
Trending Topics
#11
Gingervitis Addict
iTrader: (2)
Unless you want to deal with the headaches of scaling the IFR table (and then all the other tables too) I would do an SD tune.
If you think you can deal with scaling everything, I'd go with an Abaco MAF or put an LS7 card style MAF in the biggest possible tube (like 4" or maybe even larger) so it doesn't run into the Hz limit.
If you think you can deal with scaling everything, I'd go with an Abaco MAF or put an LS7 card style MAF in the biggest possible tube (like 4" or maybe even larger) so it doesn't run into the Hz limit.
#12
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Jul 2010
Location: missouri
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Unless you want to deal with the headaches of scaling the IFR table (and then all the other tables too) I would do an SD tune.
If you think you can deal with scaling everything, I'd go with an Abaco MAF or put an LS7 card style MAF in the biggest possible tube (like 4" or maybe even larger) so it doesn't run into the Hz limit.
If you think you can deal with scaling everything, I'd go with an Abaco MAF or put an LS7 card style MAF in the biggest possible tube (like 4" or maybe even larger) so it doesn't run into the Hz limit.
#15
Gingervitis Addict
iTrader: (2)
The factory PCM already has a MAP sensor in the intake manifold, it's not built into the MAF.
#16
TECH Regular
iTrader: (1)
if your map is 2 bar and you set up your pcm 2bar with a custom os(hp or efi) , i don't see why you couldnt use the same map. provided it's 0-5v. btw i use sd and see no adverse behavior when weather changes etc. most guys that say it sucks have a crappy ve tune and the maf tune is covering it up.
#17
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Jul 2010
Location: missouri
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
2.....1 for the meth injection, 1 for the PCM. Since your IAT is in your MAF sensor, you need to get a seperate one (you can buy an IAT pigtail and do it yourself, or buy the adapter harness that splits the MAF and IAT)
The factory PCM already has a MAP sensor in the intake manifold, it's not built into the MAF.
The factory PCM already has a MAP sensor in the intake manifold, it's not built into the MAF.
#18
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Jul 2010
Location: missouri
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
if your map is 2 bar and you set up your pcm 2bar with a custom os(hp or efi) , i don't see why you couldnt use the same map. provided it's 0-5v. btw i use sd and see no adverse behavior when weather changes etc. most guys that say it sucks have a crappy ve tune and the maf tune is covering it up.