Stock Shortblock Shootout updates and competitors thread.
#41
Launching!
iTrader: (1)
Join Date: Sep 2009
Location: san diego ca.
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok never mind I just did the math on what it would cost in diesel to drive there and back towing the mustang.... Looks like i'll be flying out to watch this time around. $2200.00 not counting tech card and race fuel. I sure do wish I could though.
#43
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Sheesh--
I'm working with a roller right now![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Just need to install the fuel system, wiring, tranmisson, radiator, engine, and build a turbo kit.
I'm gonna end up around 3300lbs with me in it.
I'm working with a roller right now
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Just need to install the fuel system, wiring, tranmisson, radiator, engine, and build a turbo kit.
I'm gonna end up around 3300lbs with me in it.
#45
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![The Patriot !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_patriot.gif)
#51
TECH Addict
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is a joke. Apparently people dont know what "stock" shortblock means.
So if there is "much aceptance" will forged rods and pistons be stock shortblocks too?
Rod bolts are part of the rotating assembly, rotating assembly is part of the shortblock. If you use aftermarket rod bolts you alter the shortblock from the stock state.... dont need to be a genius to figure that out.
So if there is "much aceptance" will forged rods and pistons be stock shortblocks too?
Rod bolts are part of the rotating assembly, rotating assembly is part of the shortblock. If you use aftermarket rod bolts you alter the shortblock from the stock state.... dont need to be a genius to figure that out.
- Permissible bolt-on mods, power adders and fuels
- Aftermarket Cam, Springs and Pushrods allowed
- Aftermarket Head bolts or Studs allowed
- (due to such acceptance) Aftermarket Rod bolts are allowed
- Aftermarket Intakes Allowed
- Any Power Adders or combination there-of. Turbos, Nitrous, Superchargers.
- Any Fuels Allowed... E85, E99, Methanol, Any leaded racing gasoline.
- Any Injection allowed... Carburetor or EFI
- Any Ignition allowed... Factory Computer, Stand-alone or Distributer driven.
- Aftermarket Cam, Springs and Pushrods allowed
- Aftermarket Head bolts or Studs allowed
- (due to such acceptance) Aftermarket Rod bolts are allowed
- Aftermarket Intakes Allowed
- Any Power Adders or combination there-of. Turbos, Nitrous, Superchargers.
- Any Fuels Allowed... E85, E99, Methanol, Any leaded racing gasoline.
- Any Injection allowed... Carburetor or EFI
- Any Ignition allowed... Factory Computer, Stand-alone or Distributer driven.
#53
On The Tree
Join Date: Feb 2011
Location: Katy, Texas
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just talked to Sam and the race is STILL ON!!!!!
http://www.stockshortblockshootout.com/
Right now, several people are finishing up builds and getting ready so the race will be pushed out a couple months. Some looking at June-July timeframe right now.
This will be an awesome race, just need to get some cars to come out.
Also need to discuss 1/4 or 1/8 mile???
So lets start a list of who is gonna come race. Several stock shortblock guys are real fast and should be easy money!! We are running a new car that has 0 passes on it so just hope it gets down the track. On ebay ordering parts now
Outlaw Stock
1. (BlackFlag/PacketFocus) 99 Camaro Stock Suspension Turbo car radials
2. Silent Assassin '87 300zx lq4, 72mm turbo, 4l80e
3.
4.
5.
Limited Stock
1.
2.
3.
4.
5.
http://www.stockshortblockshootout.com/
Right now, several people are finishing up builds and getting ready so the race will be pushed out a couple months. Some looking at June-July timeframe right now.
This will be an awesome race, just need to get some cars to come out.
Also need to discuss 1/4 or 1/8 mile???
So lets start a list of who is gonna come race. Several stock shortblock guys are real fast and should be easy money!! We are running a new car that has 0 passes on it so just hope it gets down the track. On ebay ordering parts now
Outlaw Stock
1. (BlackFlag/PacketFocus) 99 Camaro Stock Suspension Turbo car radials
2. Silent Assassin '87 300zx lq4, 72mm turbo, 4l80e
3.
4.
5.
Limited Stock
1.
2.
3.
4.
5.
I'm in. 1/4 mile. So far as I can tell Skinnys has the record at 8.65 @169
#56
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't want to change out my rear gear so probably won't do well in the 1/4. But we get in the low 10s I will be happy.
#57
#58
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Especially one thats gonna kick a rod in 3-5 passes lol