91 camaro twin turbo 5.3
#81
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
well i spent a little time in the garage this weekend. mostly cleaned it up but managed to do some painting as well.
also is anybody looking for an intercooler. i have two extras that i will not be using. they are both brand new and never used. make me an offer i just want them gone
also is anybody looking for an intercooler. i have two extras that i will not be using. they are both brand new and never used. make me an offer i just want them gone
#83
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
#84
TECH Apprentice
iTrader: (19)
Join Date: Mar 2007
Location: Southeast, MI
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Looks good, not sure if you decided on a trans but definetly go with the 80e, it will fit in the 3rd gen no problem. Expect to spend close to $1k on a good lock up converter and you will also have to fab a crossmember for the torque arm as the 80e doesnt have any mounting for it.
#85
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Looks good, not sure if you decided on a trans but definetly go with the 80e, it will fit in the 3rd gen no problem. Expect to spend close to $1k on a good lock up converter and you will also have to fab a crossmember for the torque arm as the 80e doesnt have any mounting for it.
#87
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
#88
#89
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
http://www.circledspecialties.com/ you get alot for your money.
#90
#91
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
so i talked to comp cams today and they want to set me up with a custom grind cam. the man seemed very knowledgeable(works for a cam company so probably would lol) and he basically said this would be a great street cam and still produce some nice power. i told him what i was doing for the build and that i wanted as much as i could get out of it and this is what he came up with.
222-224 duration
115 lobe separation
.600 lift
ok i know nothing about cams or what that stuff even means but does anyone have any input on this spec before i call them back and order this cam?
222-224 duration
115 lobe separation
.600 lift
ok i know nothing about cams or what that stuff even means but does anyone have any input on this spec before i call them back and order this cam?
#93
Comp spec'd me a Cam as well, 230 238 575 585 on 114, but my setup is totally different than yours. I also wanted under 600 lift because of the valvsprings I'm running comp 918s
#94
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
anybody have a recomendation for springs?
#96
This is incorrect, truck manifolds will fit facing forward and up, even without cutting the flanges. IMO it looks real cheesy.
#97
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
thanks
#99
Launching!
Thread Starter
Join Date: Feb 2012
Location: midland michigan
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
thanks